- Home/
- Comparison/
- Attached Equipment/
- Michigan L160 vs. JCB 407B
Michigan L160 vs. JCB 407B
22 reasons to buy Michigan L160:
Sizes
Unloading ground clearance at maximum lifting | 3180 mm and 2474 mm | 22 % more or 706 mm |
Radius at maximum height and unloading | 1150 mm and 662 mm | 42 % more or 488 mm |
Fork tines length | 1500 mm and 1200 mm | 20 % more or 300 mm |
Clearance | 487 mm and 367 mm | 25 % more or 120 mm |
Operation
Fuel Capacity | 340 l. and 100 l. | 71 % more or 240 l. |
Cooling system fluid volume | 70 l. and 15.5 l. | 78 % more or 54.5 l. |
Engine oil volume | 27 l. and 10.7 l. | 60 % more or 16.3 l. |
Front differential fluid volume | 45 l. and 9.5 l. | 79 % more or 35.5 l. |
Rear differential fluid volume | 56 l. and 10.5 l. | 81 % more or 45.5 l. |
Hydraulic system fluid volume | 320 l. and 85 l. | 73 % more or 235 l. |
Motor
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 9.6 l. and 4.9 l. | 49 % more or 4.7 l. |
Full power | 196.9 kW and 48.5 kW | 75 % more or 148.4 kW |
Effective power | 187.9 kW and 47 kW | 75 % more or 140.9 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 962 Nm and 248 Nm | 74 % more or 714 Nm |
Hydraulic system
Pump bandwidth | 250 l/min and 64 l/min | 74 % more or 186 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 39.9 km/h and 20 km/h | 50 % more or 19.9 km/h |
Maximum reverse gear | 39.9 km/h and 20 km/h | 50 % more or 19.9 km/h |
6 reasons to buy JCB 407B:
Sizes
Maximum lifting height | 2978 mm and 835 mm | 72 % more or 2143 mm |
Shovel
Breakout power | 44.1 kN and 178.8 kN | 75 % less or 134.7 kN |
Operation
Turn radius | 3925 mm and 7380 mm | 47 % less or 3455 mm |
Generator current strength | 65 amperes and 60 amperes | 8 % more or 5 amperes |
Static bucket tipping load | 3014 kg and 16959.8 kg | 82 % less or 13945.8 kg |
Static tipping forks load | 2200 kg and 10200 kg | 78 % less or 8000 kg |
Neutral reasons:
Sizes
Height to cab upper part | 3687 mm and 2597 mm |
Wheelbase | 3550 mm and 2000 mm |
Between tyres width | 3004 mm and 1692 mm |
Hinge axis maximum height | 4447 mm and 3099 mm |
Length with bucket on ground level | 8140 mm and 4963 mm |
Operation
Operating voltage | 24 V and 12 V |
Tyre size | 26.5-25 and 12.5x20 |
Motor
Model | TD102GB and ECE R49.4 |
Hydraulic system
Type of pump | triple paddle type and single gear pump with a constant priority of fluid supplying to steering circuit |
Overflow valve pressure | 19994.8 kPa and 22000 kPa |
Gear box
Transmission type | Volvo BM HT 200 automatic transmission system with power gear shifting and hydrostatic |
Images
Sizes
2. Between tyres width | 3004 mm | 2. Between tyres width | 1692 mm |
3. Height to cab upper part | 3687 mm | 3. Height to cab upper part | 2597 mm |
4. Wheelbase | 3550 mm | 4. Wheelbase | 2000 mm |
5. Clearance | 487 mm | 5. Clearance | 367 mm |
6. Hinge axis maximum height | 4447 mm | 6. Hinge axis maximum height | 3099 mm |
7. Unloading ground clearance at maximum lifting | 3180 mm | 7. Unloading ground clearance at maximum lifting | 2474 mm |
9. Fork tines length | 1500 mm | 9. Fork tines length | 1200 mm |
11. Maximum lifting height | 835 mm | 11. Maximum lifting height | 2978 mm |
1. Length with bucket on ground level | 8140 mm | 1. Length with bucket on ground level | 4963 mm |