- Home/
- Comparison/
- Attached Equipment/
- Michigan L50B vs. JCB 411ZX Zet
Michigan L50B vs. JCB 411ZX Zet
18 reasons to buy Michigan L50B:
Sizes
Radius at maximum height and unloading | 1040 mm and 705 mm | 32 % more or 335 mm |
Fork tines length | 1225 mm and 1200 mm | 2 % more or 25 mm |
Maximum lifting height | 3550 mm and 3328 mm | 6 % more or 222 mm |
Shovel
Bucket capacity with top | 1.5 m3 and 1.2 m3 | 20 % more or 0.3 m3 |
Brimmed bucket capacity | 1.1 m3 and 1 m3 | 9 % more or 0.1 m3 |
Operation
Fuel Capacity | 170 l. and 110 l. | 35 % more or 60 l. |
Static bucket tipping load | 4900 kg and 5200 kg | 6 % less or 300 kg |
Cooling system fluid volume | 22 l. and 18 l. | 18 % more or 4 l. |
Engine oil volume | 11 l. and 10.7 l. | 3 % more or 0.3 l. |
Front differential fluid volume | 24 l. and 16 l. | 33 % more or 8 l. |
Rear differential fluid volume | 24 l. and 18 l. | 25 % more or 6 l. |
Motor
Full power | 71.6 kW and 55.9 kW | 22 % more or 15.7 kW |
Effective power | 67.9 kW and 50 kW | 26 % more or 17.9 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 370 Nm and 302.3 Nm | 18 % more or 67.7 Nm |
Hydraulic system
Lifting time | 4.4 sec and 4.9 sec | 10 % less or 0.5 sec |
Gear box
Maximum forward speed | 36.4 km/h and 20 km/h | 45 % more or 16.4 km/h |
Maximum reverse gear | 36.4 km/h and 20 km/h | 45 % more or 16.4 km/h |
10 reasons to buy JCB 411ZX Zet:
Sizes
Unloading ground clearance at maximum lifting | 2775 mm and 2770 mm | 0 % more or 5 mm |
Clearance | 430 mm and 380 mm | 12 % more or 50 mm |
Operation
Turn radius | 4550 mm and 5400 mm | 16 % less or 850 mm |
Generator current strength | 65 amperes and 60 amperes | 8 % more or 5 amperes |
Static tipping forks load | 3550 kg and 6620 kg | 46 % less or 3070 kg |
Transmission fluid volume | 130 l. and 7 l. | 95 % more or 123 l. |
Hydraulic system fluid volume | 130 l. and 106 l. | 18 % more or 24 l. |
Motor
Displacement | 4.4 l. and 4 l. | 9 % more or 0.4 l. |
Hydraulic system
Lowering time | 3.1 sec and 3.3 sec | 6 % less or 0.2 sec |
Pump bandwidth | 90 l/min and 31.7 l/min | 65 % more or 58.3 l/min |
Neutral reasons:
Sizes
Length with bucket on ground level | 6380 mm and 5530 mm |
Between tyres width | 2140 mm and 2250 mm |
Height to cab upper part | 3010 mm and 2870 mm |
Wheelbase | 2750 mm and 2250 mm |
Hinge axis maximum height | 3710 mm and 3516 mm |
Operation
Tyre size | 15.5R25 and 405/80 R25 |
Operating voltage | 24 V and 12 V |
Working weight | 8101.2 kg and 7620 kg |
Rear axle oscillating | 12 degrees and 9 degrees |
Motor
Model | VME TD 40GA and 1104C-44 |
Aspiration | turbocharging and natural aspiration |
Torque measured at | 1400 rev / min and 1400 rev / min |
Hydraulic system
Type of pump | Variable displacement piston pump, with load sensing, axial and gear type pump |
Overflow valve pressure | 26000.1 kPa and 24497.1 kPa |
Gear box
Transmission type | VME powershift and Hydro-Static Transmission |
Images
Sizes
3. Height to cab upper part | 3010 mm | 3. Height to cab upper part | 2870 mm |
4. Wheelbase | 2750 mm | 4. Wheelbase | 2250 mm |
5. Clearance | 380 mm | 5. Clearance | 430 mm |
6. Hinge axis maximum height | 3710 mm | 6. Hinge axis maximum height | 3516 mm |
7. Unloading ground clearance at maximum lifting | 2770 mm | 7. Unloading ground clearance at maximum lifting | 2775 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1200 mm |
11. Maximum lifting height | 3550 mm | 11. Maximum lifting height | 3328 mm |
1. Length with bucket on ground level | 6380 mm | 1. Length with bucket on ground level | 5530 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 2250 mm |