- Home/
- Comparison/
- Attached Equipment/
- Michigan L50B vs. JCB 436HT Ultrahigh Lift
Michigan L50B vs. JCB 436HT Ultrahigh Lift
8 reasons to buy Michigan L50B:
Sizes
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Shovel
Breakout power | 60.6 kN and 153 kN | 60 % less or 92.4 kN |
Operation
Turn radius | 5400 mm and 6620 mm | 18 % less or 1220 mm |
Static bucket tipping load | 4900 kg and 7668 kg | 36 % less or 2768 kg |
Motor
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
Lowering time | 3.3 sec and 3.4 sec | 3 % less or 0.1 sec |
Lifting time | 4.4 sec and 5.9 sec | 25 % less or 1.5 sec |
Gear box
Maximum reverse gear | 36.4 km/h and 27 km/h | 26 % more or 9.4 km/h |
23 reasons to buy JCB 436HT Ultrahigh Lift:
Sizes
Maximum lifting height | 5045 mm and 3550 mm | 30 % more or 1495 mm |
Clearance | 459 mm and 380 mm | 17 % more or 79 mm |
Unloading ground clearance at maximum lifting | 4191 mm and 2770 mm | 34 % more or 1421 mm |
Radius at maximum height and unloading | 1068 mm and 1040 mm | 3 % more or 28 mm |
Shovel
Brimmed bucket capacity | 2.1 m3 and 1.1 m3 | 48 % more or 1.0 m3 |
Bucket capacity with top | 2.4 m3 and 1.5 m3 | 37 % more or 0.9 m3 |
Operation
Front differential fluid volume | 39 l. and 24 l. | 38 % more or 15 l. |
Rear differential fluid volume | 39 l. and 24 l. | 38 % more or 15 l. |
Hydraulic system fluid volume | 208.2 l. and 106 l. | 49 % more or 102.2 l. |
Generator current strength | 70 amperes and 60 amperes | 14 % more or 10 amperes |
Static tipping forks load | 5428.1 kg and 6620 kg | 18 % less or 1191.9 kg |
Fuel Capacity | 230.9 l. and 170 l. | 26 % more or 60.9 l. |
Cooling system fluid volume | 34.1 l. and 22 l. | 35 % more or 12.1 l. |
Engine oil volume | 14 l. and 11 l. | 21 % more or 3 l. |
Transmission fluid volume | 32.2 l. and 7 l. | 78 % more or 25.2 l. |
Motor
Full power | 132 kW and 71.6 kW | 46 % more or 60.4 kW |
Effective power | 123 kW and 67.9 kW | 45 % more or 55.1 kW |
Maximum torque | 786.4 Nm and 370 Nm | 53 % more or 416.4 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 5.9 l. and 4 l. | 32 % more or 1.9 l. |
Hydraulic system
Unloading time | 1 sec and 1.1 sec | 9 % less or 0.1 sec |
Pump bandwidth | 264 l/min and 31.7 l/min | 88 % more or 232.3 l/min |
Gear box
Maximum forward speed | 37.8 km/h and 36.4 km/h | 4 % more or 1.4 km/h |
Neutral reasons:
Sizes
Between tyres width | 2140 mm and 2597 mm |
Height to cab upper part | 3010 mm and 3335 mm |
Wheelbase | 2750 mm and 3000 mm |
Hinge axis maximum height | 3710 mm and 4650 mm |
Length with bucket on ground level | 6380 mm and 7282 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 12 degrees and 21 degrees |
Tyre size | 15.5R25 and Michelin 20.5R25 XHA (L3) |
Working weight | 8101.2 kg and 15925.2 kg |
Motor
Model | VME TD 40GA and BTAA 5.9C |
Power measured at | 2200 rev / min and 2200 rev / min |
Aspiration | turbocharging and turbocharging |
Hydraulic system
Overflow valve pressure | 26000.1 kPa and 24993.5 kPa |
Type of pump | Variable displacement piston pump, with load sensing, axial and twin variable displacement piston pumps |
Gear box
Transmission type | VME powershift and smooth power shifting |
Images
Sizes
1. Length with bucket on ground level | 6380 mm | 1. Length with bucket on ground level | 7282 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 2597 mm |
3. Height to cab upper part | 3010 mm | 3. Height to cab upper part | 3335 mm |
4. Wheelbase | 2750 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 380 mm | 5. Clearance | 459 mm |
6. Hinge axis maximum height | 3710 mm | 6. Hinge axis maximum height | 4650 mm |
7. Unloading ground clearance at maximum lifting | 2770 mm | 7. Unloading ground clearance at maximum lifting | 4191 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3550 mm | 11. Maximum lifting height | 5045 mm |