- Home/
- Comparison/
- Loader-Digger/
- Case 580 Super M+ vs. John Deere 410E
Case 580 Super M+ vs. John Deere 410E
15 reasons to buy Case 580 Super M+:
Sizes
Clearance | 366 mm and 356 mm | 3 % more or 10 mm |
Operation
Turn radius | 3425 mm and 3560 mm | 4 % less or 135 mm |
Cooling system fluid volume | 18 l. and 16 l. | 11 % more or 2 l. |
Transmission fluid volume | 20.8 l. and 14 l. | 33 % more or 6.8 l. |
Rear axle fluid volume | 14.2 l. and 13 l. | 8 % more or 1.2 l. |
Generator current strength | 90 amperes and 65 amperes | 28 % more or 25 amperes |
Maximum weight | 8223 kg and 6804 kg | 17 % more or 1419 kg |
Fuel Capacity | 159 l. and 136 l. | 14 % more or 23 l. |
Hydraulic system fluid volume | 119 l. and 95 l. | 20 % more or 24 l. |
Oil system fluid volume | 13.6 l. and 13 l. | 4 % more or 0.6 l. |
Motor
Maximum effective torque | 392 Nm and 389.1 Nm | 1 % more or 2.9 Nm |
Load-transfer device
Bucket breakout force | 40.8 kN and 45.4 kN | 10 % less or 4.6 kN |
Ground clearance at maximum unloading height | 2800 mm and 2490 mm | 11 % more or 310 mm |
Gear box
Maximum forward speed | 42.6 km/h and 39.3 km/h | 8 % more or 3.3 km/h |
Maximum reverse gear | 51.5 km/h and 43.8 km/h | 15 % more or 7.7 km/h |
13 reasons to buy John Deere 410E:
Operation
Front axle fluid volume | 8.5 l. and 7.6 l. | 11 % more or 0.9 l. |
Motor
Effective power | 67.1 kW and 67 kW | 0 % more or 0.1 kW |
Full power | 73.1 kW and 71 kW | 3 % more or 2.1 kW |
Load-transfer device
Lifting capacity at full height | 3332 kg and 2804 kg | 16 % more or 528 kg |
Radius at max unloading height | 902 mm and 763 mm | 15 % more or 139 mm |
Digging depth | 157 mm and 33 mm | 79 % more or 124 mm |
Hydraulic system
Pump bandwidth | 159 l/min and 144 l/min | 9 % more or 15 l/min |
Backdigger
Loading height in folded state | 3810 mm and 3400 mm | 11 % more or 410 mm |
Loading height in unfolded state | 4720 mm and 4040 mm | 14 % more or 680 mm |
Radius at high-altitude loading in folded state | 7110 mm and 2670 mm | 62 % more or 4440 mm |
Radius at high-altitude loading in unfolded state | 8330 mm and 3500 mm | 58 % more or 4830 mm |
Digging depth in folded state | 4830 mm and 4390 mm | 9 % more or 440 mm |
Digging depth in unfolded state | 6100 mm and 5560 mm | 9 % more or 540 mm |
Neutral reasons:
Sizes
Transport length | 6950 mm and 7290 mm |
Transport width | 2360 mm and 2180 mm |
Transport height | 4360 mm and 3940 mm |
Height to cab upper part | 2730 mm and 2820 mm |
Wheelbase | 2150 mm and 2100 mm |
Operation
Front tyres size 2wd / 4wd | 14.5x16.1/12.5x16.5 and 11L-16,12 PR F3/12.5/80-18,10 PR |
Rear tyres size 2wd/4wd | 21Lx24/21Lx24 and 19.5L-24,10 PR R4 |
Operating voltage | 12 V and 12 V |
Working weight 2wd | 6761 kg and 147 kg |
Motor
Displacement | 4.5 l. and 4.5 l. |
Manufacturer | Case and John Deere |
Power measured at | 2200 rev / min and 2200 rev / min |
Model | Family III 445T/M2, 2 level and 4045T |
Cylinders number | 4 and 4 |
Effective torque increase | 29 % and 34 % |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Shovel width | 2360 mm and 2340 mm |
Hydraulic system
Type of pump | series coupling of gear type, actuated by transmission and Axial-piston pump |
Overflow valve pressure | 0 kPa and 25000 kPa |
Gear box
Reverse gears number | 4 and 4 |
Transmission type | 4-speed synchronized mesh with power hydraulic clutches and 4-speed transmission with a helical gear with a clutch switch, synchronized on all transmissions with hydraulic reverser |
Forward gears number | 4 and 4 |
Backdigger
Hinge joint radius in folded state | 5510 mm and 5990 mm |
Hinge joint radius in unfolded state | 6650 mm and 7210 mm |
Images
Sizes
5. Clearance | 366 mm | 5. Clearance | 356 mm |
6. Height to cab upper part | 2730 mm | 6. Height to cab upper part | 2820 mm |
1. Transport length | 6950 mm | 1. Transport length | 7290 mm |
2. Transport width | 2360 mm | 2. Transport width | 2180 mm |
3. Transport height | 4360 mm | 3. Transport height | 3940 mm |
4. Wheelbase | 2150 mm | 4. Wheelbase | 2100 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2800 mm | 7. Ground clearance at maximum unloading height | 2490 mm |
8. Radius at max unloading height | 763 mm | 8. Radius at max unloading height | 902 mm |
9. Digging depth | 33 mm | 9. Digging depth | 157 mm |
Backdigger
10. Loading height in folded state | 3400 mm | 10. Loading height in folded state | 3810 mm |
11. Hinge joint radius in folded state | 5510 mm | 11. Hinge joint radius in folded state | 5990 mm |
12. Digging depth in folded state | 4390 mm | 12. Digging depth in folded state | 4830 mm |
13. Radius at high-altitude loading in folded state | 2670 mm | 13. Radius at high-altitude loading in folded state | 7110 mm |