- Home/
- Comparison/
- Loader-Digger/
- Case 580M serie III vs. John Deere 410D
Case 580M serie III vs. John Deere 410D
11 reasons to buy Case 580M serie III:
Sizes
Clearance | 376 mm and 330 mm | 12 % more or 46 mm |
Operation
Turn radius | 3352.8 mm and 3550 mm | 6 % less or 197.2 mm |
Maximum weight | 7489 kg and 7075 kg | 6 % more or 414 kg |
Hydraulic system fluid volume | 104 l. and 41 l. | 61 % more or 63 l. |
Generator current strength | 90 amperes and 78 amperes | 13 % more or 12 amperes |
Oil system fluid volume | 13.6 l. and 8.9 l. | 35 % more or 4.7 l. |
Cooling system fluid volume | 16.8 l. and 16 l. | 5 % more or 0.8 l. |
Motor
Effective power | 59 kW and 55.9 kW | 5 % more or 3.1 kW |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Maximum effective torque | 367.4 Nm and 303.7 Nm | 17 % more or 63.7 Nm |
Load-transfer device
Digging depth | 199 mm and 107 mm | 46 % more or 92 mm |
8 reasons to buy John Deere 410D:
Operation
Front axle fluid volume | 6.5 l. and 5.5 l. | 15 % more or 1.0 l. |
Fuel Capacity | 129 l. and 119 l. | 8 % more or 10 l. |
Transmission fluid volume | 41 l. and 19.4 l. | 53 % more or 21.6 l. |
Motor
Full power | 63.4 kW and 63 kW | 1 % more or 0.4 kW |
Load-transfer device
Ground clearance at maximum unloading height | 2740 mm and 2640 mm | 4 % more or 100 mm |
Radius at max unloading height | 739 mm and 717 mm | 3 % more or 22 mm |
Backdigger
Digging depth in unfolded state | 5610 mm and 5560 mm | 1 % more or 50 mm |
Digging depth in folded state | 4670 mm and 4340 mm | 7 % more or 330 mm |
Neutral reasons:
Sizes
Wheelbase | 2150 mm and 2100 mm |
Transport length | 7070 mm and 7138.4 mm |
Transport width | 2180 mm and 2340 mm |
Transport height | 3420 mm and 3480.8 mm |
Operation
Front tyres size 2wd / 4wd | 11Lx16.1/12x16.5 and 11-162PR F3F/12-16.58PR F3 |
Rear tyres size 2wd/4wd | 17.5Lx24/19.5Lx24 and 19.5-24 10PR R4 |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | Case and John Deere |
Aspiration | turbocharging and natural aspiration or turbocharging |
Model | Family III 445T/M3, III Level III certified and 4045T |
Displacement | 4.5 l. and 4.5 l. |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 4 and 4 |
Load-transfer device
Shovel width | 2.1 mm and 2270 mm |
Hydraulic system
Type of pump | gear-type, actuated by transmission and Engine with natural aspiration and turbocharging with static and dynamic synchronization |
Gear box
Forward gears number | 4 and 4 |
Reverse gears number | 4 and 4 |
Transmission type | 4-speed synchronized mesh with power hydraulic clutches and Fully synchronized, 4-speed with a clutch switch, with hydraulic reverser |
Backdigger
Hinge joint radius in folded state | 5440 mm and 5610 mm |
Hinge joint radius in unfolded state | 6650 mm and 6530 mm |
Images
Sizes
1. Transport length | 7070 mm | 1. Transport length | 7138.4 mm |
2. Transport width | 2180 mm | 2. Transport width | 2340 mm |
3. Transport height | 3420 mm | 3. Transport height | 3480.8 mm |
4. Wheelbase | 2150 mm | 4. Wheelbase | 2100 mm |
5. Clearance | 376 mm | 5. Clearance | 330 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2640 mm | 7. Ground clearance at maximum unloading height | 2740 mm |
8. Radius at max unloading height | 717 mm | 8. Radius at max unloading height | 739 mm |
9. Digging depth | 199 mm | 9. Digging depth | 107 mm |
Backdigger
11. Hinge joint radius in folded state | 5440 mm | 11. Hinge joint radius in folded state | 5610 mm |
12. Digging depth in folded state | 4340 mm | 12. Digging depth in folded state | 4670 mm |