- Home/
- Comparison/
- Loader-Digger/
- Caterpillar 428D vs. Case 580M
Caterpillar 428D vs. Case 580M
12 reasons to buy Caterpillar 428D:
Operation
Fuel Capacity | 128 l. and 119 l. | 7 % more or 9 l. |
Motor
Full power | 61.9 kW and 60 kW | 3 % more or 1.9 kW |
Effective power | 59.7 kW and 57 kW | 5 % more or 2.7 kW |
Load-transfer device
Lifting capacity at full height | 3468 kg and 2804 kg | 19 % more or 664 kg |
Radius at max unloading height | 764 mm and 717 mm | 6 % more or 47 mm |
Hydraulic system
Pump bandwidth | 163 l/min and 108 l/min | 34 % more or 55 l/min |
Backdigger
Digging depth in folded state | 4854 mm and 4340 mm | 11 % more or 514 mm |
Digging depth in unfolded state | 5894 mm and 5560 mm | 6 % more or 334 mm |
Bucket digging force in folded state | 5824.1 kg and 5085.7 kg | 13 % more or 738.4 kg |
Bucket digging force in unfolded state | 5774.2 kg and 5085.7 kg | 12 % more or 688.5 kg |
Loading height in folded state | 3712 mm and 3400 mm | 8 % more or 312 mm |
Loading height in unfolded state | 4274 mm and 4040 mm | 5 % more or 234 mm |
10 reasons to buy Case 580M:
Sizes
Clearance | 376 mm and 320 mm | 15 % more or 56 mm |
Operation
Turn radius | 3350 mm and 5350 mm | 37 % less or 2000 mm |
Motor
Displacement | 4.5 l. and 4 l. | 11 % more or 0.5 l. |
Load-transfer device
Ground clearance at maximum unloading height | 2640 mm and 2613 mm | 1 % more or 27 mm |
Digging depth | 199 mm and 77 mm | 61 % more or 122 mm |
Bucket breakout force | 40.8 kN and 51 kN | 20 % less or 10.2 kN |
Gear box
Maximum reverse gear | 47.6 km/h and 31.8 km/h | 33 % more or 15.8 km/h |
Maximum forward speed | 39.4 km/h and 31.8 km/h | 19 % more or 7.6 km/h |
Backdigger
Radius at high-altitude loading in folded state | 2670 mm and 1742 mm | 35 % more or 928 mm |
Radius at high-altitude loading in unfolded state | 3500 mm and 2747 mm | 22 % more or 753 mm |
Neutral reasons:
Sizes
Transport length | 5760 mm and 7070 mm |
Transport width | 2396 mm and 2180 mm |
Transport height | 3740 mm and 3420 mm |
Height to cab upper part | 2900 mm and 2720 mm |
Wheelbase | 2100 mm and 2150 mm |
Operation
Front tyres size 2wd / 4wd | 12.5/80x18,10PR and 11Lx16.1/12x16.5 |
Rear tyres size 2wd/4wd | 16.9x28,10PR and 17.5Lx24/19.5Lx24 |
Motor
Manufacturer | Caterpillar and Case |
Model | 3054T and Family III 445/M2, 2 level |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 4 and 4 |
Load-transfer device
Shovel width | 2262 mm and 2080 mm |
Hydraulic system
Type of pump | load sensing, pressure control, with locking in the middle position and gear-type, actuated by transmission |
Overflow valve pressure | 22800 kPa and 146 kPa |
Gear box
Transmission type | servodrive and 4-speed synchronized mesh with power hydraulic clutches |
Forward gears number | 4 and 4 |
Reverse gears number | 4 and 4 |
Backdigger
Hinge joint radius in folded state | 5637 mm and 5440 mm |
Hinge joint radius in unfolded state | 6664 mm and 6650 mm |
Images
Sizes
1. Transport length | 5760 mm | 1. Transport length | 7070 mm |
2. Transport width | 2396 mm | 2. Transport width | 2180 mm |
3. Transport height | 3740 mm | 3. Transport height | 3420 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 2150 mm |
5. Clearance | 320 mm | 5. Clearance | 376 mm |
6. Height to cab upper part | 2900 mm | 6. Height to cab upper part | 2720 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2613 mm | 7. Ground clearance at maximum unloading height | 2640 mm |
8. Radius at max unloading height | 764 mm | 8. Radius at max unloading height | 717 mm |
9. Digging depth | 77 mm | 9. Digging depth | 199 mm |
Backdigger
10. Loading height in folded state | 3712 mm | 10. Loading height in folded state | 3400 mm |
11. Hinge joint radius in folded state | 5637 mm | 11. Hinge joint radius in folded state | 5440 mm |
12. Digging depth in folded state | 4854 mm | 12. Digging depth in folded state | 4340 mm |
13. Radius at high-altitude loading in folded state | 1742 mm | 13. Radius at high-altitude loading in folded state | 2670 mm |