- Home/
- Comparison/
- Loader-Digger/
- John Deere 315SJ vs. Case 590 Super N
John Deere 315SJ vs. Case 590 Super N
4 reasons to buy John Deere 315SJ:
Operation
Cooling system fluid volume | 21 l. and 18 l. | 14 % more or 3 l. |
Rear axle fluid volume | 18 l. and 13.6 l. | 24 % more or 4.4 l. |
Load-transfer device
Radius at max unloading height | 785 mm and 741 mm | 6 % more or 44 mm |
Digging depth | 160 mm and 157 mm | 2 % more or 3 mm |
18 reasons to buy Case 590 Super N:
Sizes
Clearance | 360 mm and 351 mm | 2 % more or 9 mm |
Operation
Fuel Capacity | 159 l. and 155 l. | 3 % more or 4 l. |
Hydraulic system fluid volume | 132 l. and 91 l. | 31 % more or 41 l. |
Oil system fluid volume | 13.6 l. and 13 l. | 4 % more or 0.6 l. |
Transmission fluid volume | 19.4 l. and 16 l. | 18 % more or 3.4 l. |
Front axle fluid volume | 8.6 l. and 6.6 l. | 23 % more or 2.0 l. |
Generator current strength | 120 amperes and 90 amperes | 25 % more or 30 amperes |
Motor
Effective power | 80.5 kW and 69 kW | 14 % more or 11.5 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum effective torque | 515.2 Nm and 384 Nm | 25 % more or 131.2 Nm |
Load-transfer device
Ground clearance at maximum unloading height | 2720 mm and 2690 mm | 1 % more or 30 mm |
Hydraulic system
Pump bandwidth | 162.8 l/min and 136 l/min | 16 % more or 26.8 l/min |
Gear box
Maximum reverse gear | 25.6 km/h and 22.5 km/h | 12 % more or 3.1 km/h |
Maximum forward speed | 38.9 km/h and 38.4 km/h | 1 % more or 0.5 km/h |
Backdigger
Digging depth in folded state | 4720 mm and 4420 mm | 6 % more or 300 mm |
Digging depth in unfolded state | 5940 mm and 5490 mm | 8 % more or 450 mm |
Loading height in folded state | 4000 mm and 3580 mm | 10 % more or 420 mm |
Loading height in unfolded state | 4810 mm and 4340 mm | 10 % more or 470 mm |
Neutral reasons:
Sizes
Transport width | 2490 mm and 2360 mm |
Transport length | 5257.8 mm and 7250 mm |
Transport height | 3480 mm and 3540 mm |
Height to cab upper part | 2795 mm and 2710 mm |
Wheelbase | 2140 mm and 2150 mm |
Operation
Working weight 4wd | 8322 kg and 9279.6 kg |
Front tyres size 2wd / 4wd | 12.5/80-18 10PR and 14x17.5 |
Rear tyres size 2wd/4wd | 16.9-28 10PR and 21Lx24 |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | John Deere and Case |
Model | 4045T and 445TA/E3 |
Displacement | 4.5 l. and 4.5 l. |
Torque measured at | 1400 rev / min and 1400 rev / min |
Effective torque increase | 46 % and 45 % |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Shovel width | 2184 mm and 2362.2 mm |
Hydraulic system
Overflow valve pressure | 24980 kPa and 23786.9 kPa |
Gear box
Transmission type | powershift transmission and powershift transmission |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Backdigger
Hinge joint radius in folded state | 5610 mm and 5980 mm |
Hinge joint radius in unfolded state | 6630 mm and 7170 mm |
Images
Sizes
1. Transport length | 5257.8 mm | 1. Transport length | 7250 mm |
2. Transport width | 2490 mm | 2. Transport width | 2360 mm |
3. Transport height | 3480 mm | 3. Transport height | 3540 mm |
4. Wheelbase | 2140 mm | 4. Wheelbase | 2150 mm |
5. Clearance | 351 mm | 5. Clearance | 360 mm |
6. Height to cab upper part | 2795 mm | 6. Height to cab upper part | 2710 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2690 mm | 7. Ground clearance at maximum unloading height | 2720 mm |
8. Radius at max unloading height | 785 mm | 8. Radius at max unloading height | 741 mm |
9. Digging depth | 160 mm | 9. Digging depth | 157 mm |
Backdigger
10. Loading height in folded state | 3580 mm | 10. Loading height in folded state | 4000 mm |
11. Hinge joint radius in folded state | 5610 mm | 11. Hinge joint radius in folded state | 5980 mm |
12. Digging depth in folded state | 4420 mm | 12. Digging depth in folded state | 4720 mm |