- Home/
- Comparison/
- Medium-Sized Excavator/
- Case CX75SR vs. Kato HD307
Case CX75SR vs. Kato HD307
7 reasons to buy Case CX75SR:
Sizes
Width to outside of caterpillar track | 2320 mm and 2300 mm | 1 % more or 20 mm |
Operation
Hydraulic pump flow rate | 25.4 l/min and 164 l/min | 85 % less or 138.6 l/min |
Cooling system fluid volume | 9.6 l. and 9.5 l. | 1 % more or 0.1 l. |
Engine oil volume | 9.6 l. and 8 l. | 17 % more or 1.6 l. |
Generator current strength | 50 amperes and 20 amperes | 60 % more or 30 amperes |
Motor
Displacement | 3.1 l. and 2.8 l. | 10 % more or 0.3 l. |
Booms/sections features 1
Maximum radius along ground level | 6350 mm and 6280 mm | 1 % more or 70 mm |
14 reasons to buy Kato HD307:
Swing device
Rotation speed | 13 rev / min and 10 rev / min | 23 % more or 3 rev |
Operation
Fuel Capacity | 140 l. and 100 l. | 29 % more or 40 l. |
Hydraulic system fluid volume | 105 l. and 95 l. | 10 % more or 10 l. |
Hydraulic system overflow valve pressure | 27400 kPa and 142.8 kPa | 99 % more or 27257.2 kPa |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Carrier
Specific ground pressure | 30.4 kPa and 34 kPa | 11 % less or 3.6 kPa |
Maximum travel speed | 5.5 km/h and 4.9 km/h | 11 % more or 0.6 km/h |
Booms/sections features 2
Maximum excavation depth | 4710 mm and 4150 mm | 12 % more or 560 mm |
Maximum radius along ground level | 6750 mm and 6400 mm | 5 % more or 350 mm |
Maximum loading height | 5650 mm and 5250 mm | 7 % more or 400 mm |
Maximum vertical wall digging depth | 4230 mm and 3650 mm | 14 % more or 580 mm |
Booms/sections features 1
Maximum excavation depth | 4210 mm and 4200 mm | 0 % more or 10 mm |
Maximum loading height | 5280 mm and 5150 mm | 2 % more or 130 mm |
Maximum vertical wall digging depth | 3740 mm and 3250 mm | 13 % more or 490 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2700 mm and 2560 mm |
Clearance | 360 mm and 360 mm |
Rear platform swing radius | 1210 mm and 1750 mm |
Caterpillar track length on ground level | 2210 mm and 2120 mm |
Operation
Working weight | 7660 kg and 6400 kg |
Operating voltage | 12 V and 24 V |
Motor
Model | CC-4JG1 and A-4JB1 |
Cylinders number | 4 and 4 |
Manufacturer | Isuzu and Isuzu |
Carrier
Shoe dimensions | 450 mm and 450 mm |
Track width | 1870 mm and 1850 mm |
Booms/sections features 2
Maximum cut height | 7350 mm and 7770 mm |
Booms/sections features 1
Unit load-transfer height | 2970 mm and 2610 mm |
Unit load-transfer length | 5970 mm and 6080 mm |
Maximum cut height | 7200 mm and 7400 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2320 mm | 2. Width to outside of caterpillar track | 2300 mm |
4. Caterpillar track length on ground level | 2210 mm | 4. Caterpillar track length on ground level | 2120 mm |
5. Clearance | 360 mm | 5. Clearance | 360 mm |
7. Height to cab upper part | 2700 mm | 7. Height to cab upper part | 2560 mm |
8. Rear platform swing radius | 1210 mm | 8. Rear platform swing radius | 1750 mm |
Carrier
6. Track width | 1870 mm | 6. Track width | 1850 mm |
14. Shoe dimensions | 450 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
11. Maximum radius along ground level | 6400 mm | 11. Maximum radius along ground level | 6750 mm |
12. Maximum vertical wall digging depth | 3650 mm | 12. Maximum vertical wall digging depth | 4230 mm |
13. Maximum excavation depth | 4150 mm | 13. Maximum excavation depth | 4710 mm |
1. Unit load-transfer length | 5910 mm | 1. Unit load-transfer length | 6080 mm |
3. Unit load-transfer height | 2950 mm | 3. Unit load-transfer height | 2610 mm |
9. Maximum cut height | 7600 mm | 9. Maximum cut height | 7770 mm |
10. Maximum loading height | 5550 mm | 10. Maximum loading height | 5650 mm |