- Home/
- Comparison/
- Medium-Sized Excavator/
- Daewoo S55V vs. Link-Belt 75 Spin Ace
Daewoo S55V vs. Link-Belt 75 Spin Ace
6 reasons to buy Daewoo S55V:
Operation
Engine oil volume | 9.7 l. and 9.6 l. | 1 % more or 0.1 l. |
Hydraulic pump flow rate | 54.9 l/min and 143.1 l/min | 62 % less or 88.2 l/min |
Fuel Capacity | 115 l. and 100 l. | 13 % more or 15 l. |
Cooling system fluid volume | 10 l. and 9.6 l. | 4 % more or 0.4 l. |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Carrier
Specific ground pressure | 30.4 kPa and 34 kPa | 11 % less or 3.6 kPa |
14 reasons to buy Link-Belt 75 Spin Ace:
Swing device
Rotation speed | 10 rev / min and 9 rev / min | 10 % more or 1 rev |
Sizes
Width to outside of caterpillar track | 2320 mm and 1880 mm | 19 % more or 440 mm |
Clearance | 356 mm and 350 mm | 2 % more or 6 mm |
Operation
Hydraulic system fluid volume | 95 l. and 80 l. | 16 % more or 15 l. |
Hydraulic system overflow valve pressure | 29371.6 kPa and 20600 kPa | 30 % more or 8771.6 kPa |
Motor
Effective power | 38.8 kW and 38.2 kW | 2 % more or 0.6 kW |
Displacement | 3.1 l. and 2.8 l. | 10 % more or 0.3 l. |
Torque measured at | 1800 rev / min and 1400 rev / min | 22 % more or 400 rev |
Maximum torque | 184.4 Nm and 181.4 Nm | 2 % more or 3.0 Nm |
Carrier
Track shoes number per side | 39 and 38 | 3 % more or 1 |
Maximum travel speed | 4.8 km/h and 3.8 km/h | 21 % more or 1.0 km/h |
Booms/sections features 1
Maximum excavation depth | 4140 mm and 3796 mm | 8 % more or 344 mm |
Maximum loading height | 5250 mm and 4048 mm | 23 % more or 1202 mm |
Maximum vertical wall digging depth | 3640 mm and 3070 mm | 16 % more or 570 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2556 mm and 2700 mm |
Rear platform swing radius | 1650 mm and 1210 mm |
Caterpillar track length on ground level | 1990 mm and 2210 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 5500 kg and 7665.7 kg |
Motor
Manufacturer | Yanmar and Isuzu |
Model | 4TNE-94 and CC-4JG1 |
Aspiration | natural aspiration and natural aspiration |
Cylinders number | 4 and 4 |
Carrier
Shoe dimensions | 400 mm and 450 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Track width | 1480 mm and 1870 mm |
Booms/sections features 1
Unit load-transfer height | 2556 mm and 2700 mm |
Unit load-transfer length | 5850 mm and 5920 mm |
Maximum cut height | 5774 mm and 7330 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1880 mm | 2. Width to outside of caterpillar track | 2320 mm |
4. Caterpillar track length on ground level | 1990 mm | 4. Caterpillar track length on ground level | 2210 mm |
5. Clearance | 350 mm | 5. Clearance | 356 mm |
7. Height to cab upper part | 2556 mm | 7. Height to cab upper part | 2700 mm |
8. Rear platform swing radius | 1650 mm | 8. Rear platform swing radius | 1210 mm |
Carrier
14. Shoe dimensions | 400 mm | 14. Shoe dimensions | 450 mm |
6. Track width | 1480 mm | 6. Track width | 1870 mm |
Booms/sections features 1
9. Maximum cut height | 5774 mm | 9. Maximum cut height | 7330 mm |
10. Maximum loading height | 4048 mm | 10. Maximum loading height | 5250 mm |
12. Maximum vertical wall digging depth | 3070 mm | 12. Maximum vertical wall digging depth | 3640 mm |
13. Maximum excavation depth | 3796 mm | 13. Maximum excavation depth | 4140 mm |
1. Unit load-transfer length | 5850 mm | 1. Unit load-transfer length | 5910 mm |
3. Unit load-transfer height | 2556 mm | 3. Unit load-transfer height | 2950 mm |