- Home/
- Comparison/
- Medium-Sized Excavator/
- Daewoo S55V vs. Terex HR32
Daewoo S55V vs. Terex HR32
3 reasons to buy Daewoo S55V:
Operation
Hydraulic pump flow rate | 54.9 l/min and 155.2 l/min | 65 % less or 100.3 l/min |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Booms/sections features 1
Maximum vertical wall digging depth | 3070 mm and 2630 mm | 14 % more or 440 mm |
12 reasons to buy Terex HR32:
Swing device
Rotation speed | 10 rev / min and 9 rev / min | 10 % more or 1 rev |
Sizes
Width to outside of caterpillar track | 2300 mm and 1880 mm | 18 % more or 420 mm |
Clearance | 408 mm and 350 mm | 14 % more or 58 mm |
Operation
Fuel Capacity | 130 l. and 115 l. | 12 % more or 15 l. |
Hydraulic system fluid volume | 140 l. and 80 l. | 43 % more or 60 l. |
Hydraulic system overflow valve pressure | 27992.7 kPa and 20600 kPa | 26 % more or 7392.7 kPa |
Motor
Effective power | 53.7 kW and 38.2 kW | 29 % more or 15.5 kW |
Displacement | 3.2 l. and 2.8 l. | 12 % more or 0.4 l. |
Carrier
Specific ground pressure | 30.3 kPa and 30.4 kPa | 0 % less or 0.1 kPa |
Maximum travel speed | 5.2 km/h and 3.8 km/h | 27 % more or 1.4 km/h |
Booms/sections features 1
Maximum excavation depth | 4250 mm and 3796 mm | 11 % more or 454 mm |
Maximum loading height | 4160 mm and 4048 mm | 3 % more or 112 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2556 mm and 2700 mm |
Rear platform swing radius | 1650 mm and 1200 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 5500 kg and 7500 kg |
Motor
Manufacturer | Yanmar and Deutz |
Model | 4TNE-94 and KHD BF 4 M |
Cylinders number | 4 and 4 |
Booms/sections features 1
Maximum cut height | 5774 mm and 6170 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1880 mm | 2. Width to outside of caterpillar track | 2300 mm |
5. Clearance | 350 mm | 5. Clearance | 408 mm |
7. Height to cab upper part | 2556 mm | 7. Height to cab upper part | 2700 mm |
8. Rear platform swing radius | 1650 mm | 8. Rear platform swing radius | 1200 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 3070 mm | 12. Maximum vertical wall digging depth | 2630 mm |
13. Maximum excavation depth | 3796 mm | 13. Maximum excavation depth | 4250 mm |
9. Maximum cut height | 5774 mm | 9. Maximum cut height | 6300 mm |
10. Maximum loading height | 4048 mm | 10. Maximum loading height | 4290 mm |