- Home/
- Comparison/
- Medium-Sized Excavator/
- Hitachi EX60LC-5 vs. Link-Belt 75 Spin Ace
Hitachi EX60LC-5 vs. Link-Belt 75 Spin Ace
11 reasons to buy Hitachi EX60LC-5:
Swing device
Rotation speed | 14.5 rev / min and 10 rev / min | 31 % more or 4.5 rev |
Sizes
Width to outside of caterpillar track | 2350 mm and 2320 mm | 1 % more or 30 mm |
Clearance | 360 mm and 356 mm | 1 % more or 4 mm |
Operation
Hydraulic system overflow valve pressure | 31371.1 kPa and 29371.6 kPa | 6 % more or 1999.5 kPa |
Cooling system fluid volume | 10 l. and 9.6 l. | 4 % more or 0.4 l. |
Engine oil volume | 12.5 l. and 9.6 l. | 23 % more or 2.9 l. |
Motor
Effective power | 40.3 kW and 38.8 kW | 4 % more or 1.5 kW |
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Carrier
Specific ground pressure | 27.5 kPa and 34 kPa | 19 % less or 6.5 kPa |
Booms/sections features 2
Maximum excavation depth | 4660 mm and 4540 mm | 3 % more or 120 mm |
Booms/sections features 1
Maximum excavation depth | 4150 mm and 4140 mm | 0 % more or 10 mm |
13 reasons to buy Link-Belt 75 Spin Ace:
Operation
Generator current strength | 50 amperes and 25 amperes | 50 % more or 25 amperes |
Hydraulic pump flow rate | 143.1 l/min and 158.4 l/min | 10 % less or 15.3 l/min |
Fuel Capacity | 100 l. and 35.7 l. | 64 % more or 64.3 l. |
Hydraulic system fluid volume | 95 l. and 90 l. | 5 % more or 5 l. |
Motor
Displacement | 3.1 l. and 3 l. | 3 % more or 0.1 l. |
Torque measured at | 1800 rev / min and 1500 rev / min | 17 % more or 300 rev |
Maximum torque | 184.4 Nm and 181 Nm | 2 % more or 3.4 Nm |
Booms/sections features 2
Maximum radius along ground level | 6770 mm and 6660 mm | 2 % more or 110 mm |
Maximum loading height | 5540 mm and 5470 mm | 1 % more or 70 mm |
Maximum vertical wall digging depth | 4100 mm and 4060 mm | 1 % more or 40 mm |
Booms/sections features 1
Maximum radius along ground level | 6390 mm and 6160 mm | 4 % more or 230 mm |
Maximum loading height | 5250 mm and 5070 mm | 3 % more or 180 mm |
Maximum vertical wall digging depth | 3640 mm and 3520 mm | 3 % more or 120 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1750 mm and 1210 mm |
Caterpillar track length on ground level | 2290 mm and 2210 mm |
Height to cab upper part | 2570 mm and 2700 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 6390 kg and 7665.7 kg |
Motor
Manufacturer | Nissan and Isuzu |
Model | A-BD30 and CC-4JG1 |
Aspiration | natural aspiration and natural aspiration |
Carrier
Track shoes number per side | 39 and 39 |
Shoe dimensions | 450 mm and 450 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Maximum travel speed | 4.8 km/h and 4.8 km/h |
Track width | 1850 mm and 1870 mm |
Booms/sections features 2
Unit load-transfer height | 2880 mm and 2950 mm |
Unit load-transfer length | 6120 mm and 5910 mm |
Maximum cut height | 7550 mm and 7620 mm |
Booms/sections features 1
Unit load-transfer height | 2570 mm and 2700 mm |
Unit load-transfer length | 6080 mm and 5920 mm |
Maximum cut height | 7150 mm and 7330 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2350 mm | 2. Width to outside of caterpillar track | 2320 mm |
4. Caterpillar track length on ground level | 2290 mm | 4. Caterpillar track length on ground level | 2210 mm |
5. Clearance | 360 mm | 5. Clearance | 356 mm |
7. Height to cab upper part | 2570 mm | 7. Height to cab upper part | 2700 mm |
8. Rear platform swing radius | 1750 mm | 8. Rear platform swing radius | 1210 mm |
Carrier
6. Track width | 1850 mm | 6. Track width | 1870 mm |
14. Shoe dimensions | 450 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
10. Maximum loading height | 5070 mm | 10. Maximum loading height | 5150 mm |
11. Maximum radius along ground level | 6160 mm | 11. Maximum radius along ground level | 6360 mm |
12. Maximum vertical wall digging depth | 3520 mm | 12. Maximum vertical wall digging depth | 4100 mm |
13. Maximum excavation depth | 4150 mm | 13. Maximum excavation depth | 4540 mm |
1. Unit load-transfer length | 6120 mm | 1. Unit load-transfer length | 5970 mm |
3. Unit load-transfer height | 2880 mm | 3. Unit load-transfer height | 2970 mm |
9. Maximum cut height | 7550 mm | 9. Maximum cut height | 7200 mm |