- Home/
- Comparison/
- Medium-Sized Excavator/
- JCB 8052 vs. Link-Belt 75 Spin Ace
JCB 8052 vs. Link-Belt 75 Spin Ace
5 reasons to buy JCB 8052:
Operation
Hydraulic pump flow rate | 126 l/min and 143.1 l/min | 12 % less or 17.1 l/min |
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Motor
Power measured at | 2600 rev / min and 2100 rev / min | 19 % more or 500 rev |
Torque measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Carrier
Specific ground pressure | 32.3 kPa and 34 kPa | 5 % less or 1.7 kPa |
15 reasons to buy Link-Belt 75 Spin Ace:
Sizes
Width to outside of caterpillar track | 2320 mm and 2000 mm | 14 % more or 320 mm |
Clearance | 356 mm and 340 mm | 4 % more or 16 mm |
Operation
Fuel Capacity | 100 l. and 70 l. | 30 % more or 30 l. |
Cooling system fluid volume | 9.6 l. and 8 l. | 17 % more or 1.6 l. |
Hydraulic system fluid volume | 95 l. and 67 l. | 29 % more or 28 l. |
Engine oil volume | 9.6 l. and 5 l. | 48 % more or 4.6 l. |
Hydraulic system overflow valve pressure | 29371.6 kPa and 25000.4 kPa | 15 % more or 4371.2 kPa |
Motor
Effective power | 38.8 kW and 34.7 kW | 11 % more or 4.1 kW |
Displacement | 3.1 l. and 2.2 l. | 29 % more or 0.9 l. |
Maximum torque | 184.4 Nm and 135 Nm | 27 % more or 49.4 Nm |
Carrier
Maximum travel speed | 4.8 km/h and 4.3 km/h | 10 % more or 0.5 km/h |
Booms/sections features 1
Maximum excavation depth | 4140 mm and 3995 mm | 4 % more or 145 mm |
Maximum radius along ground level | 6390 mm and 6056 mm | 5 % more or 334 mm |
Maximum loading height | 5250 mm and 4088 mm | 22 % more or 1162 mm |
Maximum vertical wall digging depth | 3640 mm and 2434 mm | 33 % more or 1206 mm |
Neutral reasons:
Swing device
Rotation speed | 10 rev / min and 10 rev / min |
Sizes
Rear platform swing radius | 1300 mm and 1210 mm |
Caterpillar track length on ground level | 1991 mm and 2210 mm |
Height to cab upper part | 2555 mm and 2700 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 5200 kg and 7665.7 kg |
Motor
Model | 404-22 and CC-4JG1 |
Cylinders number | 4 and 4 |
Carrier
Shoe dimensions | 400 mm and 450 mm |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 1
Unit load-transfer height | 2555 mm and 2700 mm |
Unit load-transfer length | 48.8 mm and 5920 mm |
Maximum cut height | 5547 mm and 7330 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2000 mm | 2. Width to outside of caterpillar track | 2320 mm |
4. Caterpillar track length on ground level | 1991 mm | 4. Caterpillar track length on ground level | 2210 mm |
5. Clearance | 340 mm | 5. Clearance | 356 mm |
7. Height to cab upper part | 2555 mm | 7. Height to cab upper part | 2700 mm |
8. Rear platform swing radius | 1300 mm | 8. Rear platform swing radius | 1210 mm |
Carrier
14. Shoe dimensions | 400 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
10. Maximum loading height | 4088 mm | 10. Maximum loading height | 5540 mm |
1. Unit load-transfer length | 48.8 mm | 1. Unit load-transfer length | 5970 mm |
3. Unit load-transfer height | 2555 mm | 3. Unit load-transfer height | 2970 mm |
11. Maximum radius along ground level | 6056 mm | 11. Maximum radius along ground level | 6770 mm |
9. Maximum cut height | 5547 mm | 9. Maximum cut height | 7200 mm |
12. Maximum vertical wall digging depth | 2434 mm | 12. Maximum vertical wall digging depth | 4100 mm |
13. Maximum excavation depth | 3995 mm | 13. Maximum excavation depth | 4540 mm |