- Home/
- Comparison/
- Medium-Sized Excavator/
- JCB 8060 vs. Komatsu PC45R-8
JCB 8060 vs. Komatsu PC45R-8
15 reasons to buy JCB 8060:
Swing device
Rotation speed | 9.4 rev / min and 9 rev / min | 4 % more or 0.4 rev |
Sizes
Width to outside of caterpillar track | 2000 mm and 1900 mm | 5 % more or 100 mm |
Counterweight ground clearance | 642 mm and 640 mm | 0 % more or 2 mm |
Operation
Fuel Capacity | 70 l. and 51.5 l. | 26 % more or 18.5 l. |
Cooling system fluid volume | 11 l. and 7.5 l. | 32 % more or 3.5 l. |
Hydraulic system fluid volume | 67 l. and 33 l. | 51 % more or 34 l. |
Engine oil volume | 9.6 l. and 8 l. | 17 % more or 1.6 l. |
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Motor
Full power | 44.5 kW and 32.9 kW | 26 % more or 11.6 kW |
Effective power | 43 kW and 28.9 kW | 33 % more or 14.1 kW |
Displacement | 3.1 l. and 2 l. | 35 % more or 1.1 l. |
Maximum torque | 192 Nm and 118 Nm | 39 % more or 74 Nm |
Booms/sections features 2
Maximum excavation depth | 4133 mm and 3895 mm | 6 % more or 238 mm |
Maximum radius along ground level | 6182 mm and 6160 mm | 0 % more or 22 mm |
Booms/sections features 1
Maximum excavation depth | 3733 mm and 3520 mm | 6 % more or 213 mm |
10 reasons to buy Komatsu PC45R-8:
Operation
Hydraulic system overflow valve pressure | 25000 kPa and 22994 kPa | 8 % more or 2006 kPa |
Hydraulic pump flow rate | 129.5 l/min and 150 l/min | 14 % less or 20.5 l/min |
Motor
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Carrier
Specific ground pressure | 28.4 kPa and 36.3 kPa | 22 % less or 7.9 kPa |
Maximum travel speed | 4.6 km/h and 4.4 km/h | 4 % more or 0.2 km/h |
Booms/sections features 2
Maximum loading height | 4395 mm and 3988 mm | 9 % more or 407 mm |
Maximum vertical wall digging depth | 2865 mm and 2486 mm | 13 % more or 379 mm |
Booms/sections features 1
Maximum loading height | 4190 mm and 3750 mm | 11 % more or 440 mm |
Maximum vertical wall digging depth | 2600 mm and 2132 mm | 18 % more or 468 mm |
Maximum radius along ground level | 5810 mm and 5790 mm | 0 % more or 20 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1300 mm and 1470 mm |
Caterpillar track length on ground level | 1991 mm and 1940 mm |
Height to cab upper part | 2662 mm and 2560 mm |
Operation
Working weight | 5991 kg and 4750 kg |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | Isuzu and Komatsu |
Model | 4JGI and 4D84E-3FA |
Torque measured at | 1800 rev / min and 1800 rev / min |
Carrier
Shoe dimensions | 400 mm and 400 mm |
Rolling bearings number on either side | 5 and 5 |
Track width | 1800 mm and 1500 mm |
Booms/sections features 2
Unit load-transfer length | 4808 mm and 5485 mm |
Unit load-transfer height | 2662 mm and 2560 mm |
Maximum cut height | 5679 mm and 5955 mm |
Booms/sections features 1
Unit load-transfer height | 2662 mm and 2560 mm |
Unit load-transfer length | 4808 mm and 5485 mm |
Maximum cut height | 5437 mm and 5760 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2000 mm | 2. Width to outside of caterpillar track | 1900 mm |
4. Caterpillar track length on ground level | 1991 mm | 4. Caterpillar track length on ground level | 1940 mm |
7. Height to cab upper part | 2662 mm | 7. Height to cab upper part | 2560 mm |
8. Rear platform swing radius | 1300 mm | 8. Rear platform swing radius | 1470 mm |
15. Counterweight ground clearance | 642 mm | 15. Counterweight ground clearance | 640 mm |
Carrier
6. Track width | 1800 mm | 6. Track width | 1500 mm |
14. Shoe dimensions | 400 mm | 14. Shoe dimensions | 400 mm |
Booms/sections features 1
3. Unit load-transfer height | 2662 mm | 3. Unit load-transfer height | 2560 mm |
9. Maximum cut height | 5679 mm | 9. Maximum cut height | 5760 mm |
10. Maximum loading height | 3988 mm | 10. Maximum loading height | 4190 mm |
1. Unit load-transfer length | 4808 mm | 1. Unit load-transfer length | 5485 mm |
11. Maximum radius along ground level | 6182 mm | 11. Maximum radius along ground level | 5810 mm |
12. Maximum vertical wall digging depth | 2486 mm | 12. Maximum vertical wall digging depth | 2600 mm |
13. Maximum excavation depth | 4133 mm | 13. Maximum excavation depth | 3520 mm |