vs.

      Kato HD307 vs. Case CX75

      17 reasons to buy Kato HD307:

      Swing device

      Rotation speed 13 rev / min and 9.5 rev / min 27 % more or 3.5 rev

      Operation

      Hydraulic system overflow valve pressure 27400 kPa and 204.2 kPa 99 % more or 27195.8 kPa
      Fuel Capacity 140 l. and 100 l. 29 % more or 40 l.
      Hydraulic system fluid volume 105 l. and 97 l. 8 % more or 8 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 2.8 l. and 2.2 l. 21 % more or 0.6 l.
      Torque measured at 1800 rev / min and 1500 rev / min 17 % more or 300 rev

      Carrier

      Specific ground pressure 30.4 kPa and 35.2 kPa 14 % less or 4.8 kPa
      Maximum travel speed 5.5 km/h and 5.1 km/h 7 % more or 0.4 km/h
      Hook traction force 54.9 kN and 59 kN 7 % less or 4.1 kN
      Track shoes number per side 43 and 39 9 % more or 4

      Booms/sections features 2

      Maximum loading height 5650 mm and 5540 mm 2 % more or 110 mm
      Maximum vertical wall digging depth 4230 mm and 4100 mm 3 % more or 130 mm
      Maximum excavation depth 4710 mm and 4540 mm 4 % more or 170 mm

      Booms/sections features 1

      Maximum excavation depth 4210 mm and 4140 mm 2 % more or 70 mm
      Maximum loading height 5280 mm and 5250 mm 1 % more or 30 mm
      Maximum vertical wall digging depth 3740 mm and 3640 mm 3 % more or 100 mm

      10 reasons to buy Case CX75:

      Sizes

      Width to outside of caterpillar track 2320 mm and 2300 mm 1 % more or 20 mm
      Counterweight ground clearance 750 mm and 730 mm 3 % more or 20 mm

      Operation

      Generator current strength 50 amperes and 20 amperes 60 % more or 30 amperes
      Hydraulic pump flow rate 68 l/min and 164 l/min 59 % less or 96 l/min
      Cooling system fluid volume 10.2 l. and 9.5 l. 7 % more or 0.7 l.
      Engine oil volume 9 l. and 8 l. 11 % more or 1 l.
      Boom reach drive mechanism fluid volume 2.2 l. and 1.5 l. 32 % more or 0.7 l.

      Motor

      Maximum torque 210.2 Nm and 188 Nm 11 % more or 22.2 Nm

      Booms/sections features 2

      Maximum radius along ground level 6770 mm and 6750 mm 0 % more or 20 mm

      Booms/sections features 1

      Maximum radius along ground level 6390 mm and 6280 mm 2 % more or 110 mm

      Neutral reasons:

      Sizes

      Caterpillar track length on ground level 2120 mm and 2210 mm
      Height to cab upper part 2560 mm and 2700 mm
      Clearance 360 mm and 360 mm
      Rear platform swing radius 1750 mm and 1240 mm

      Operation

      Working weight 6400 kg and 7919 kg
      Operating voltage 24 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer Isuzu and Isuzu
      Model A-4JB1 and AU-4LE2X

      Carrier

      Rolling bearings number on either side 5 and 5
      Shoe dimensions 450 mm and 450 mm
      Support rollers number on either side 1 and 1

      Booms/sections features 2

      Maximum cut height 7770 mm and 7620 mm

      Booms/sections features 1

      Unit load-transfer height 2610 mm and 2700 mm
      Unit load-transfer length 6080 mm and 5920 mm
      Maximum cut height 7400 mm and 7330 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2300 mm 2. Width to outside of caterpillar track 2320 mm
      4. Caterpillar track length on ground level 2120 mm 4. Caterpillar track length on ground level 2210 mm
      5. Clearance 360 mm 5. Clearance 360 mm
      7. Height to cab upper part 2560 mm 7. Height to cab upper part 2700 mm
      8. Rear platform swing radius 1750 mm 8. Rear platform swing radius 1240 mm
      15. Counterweight ground clearance 730 mm 15. Counterweight ground clearance 750 mm

      Carrier

      14. Shoe dimensions 450 mm 14. Shoe dimensions 450 mm

      Booms/sections features 1

      10. Maximum loading height 5650 mm 10. Maximum loading height 5150 mm
      1. Unit load-transfer length 6080 mm 1. Unit load-transfer length 5970 mm
      11. Maximum radius along ground level 6750 mm 11. Maximum radius along ground level 6360 mm
      3. Unit load-transfer height 2610 mm 3. Unit load-transfer height 2970 mm
      12. Maximum vertical wall digging depth 4230 mm 12. Maximum vertical wall digging depth 3260 mm
      9. Maximum cut height 7400 mm 9. Maximum cut height 7200 mm
      13. Maximum excavation depth 4710 mm 13. Maximum excavation depth 4190 mm