- Home/
- Comparison/
- Medium-Sized Excavator/
- Kobelco 80CS ACERA vs. Hitachi EX60LC-5
Kobelco 80CS ACERA vs. Hitachi EX60LC-5
13 reasons to buy Kobelco 80CS ACERA:
Sizes
Width to outside of caterpillar track | 2490 mm and 2350 mm | 6 % more or 140 mm |
Operation
Generator current strength | 50 amperes and 25 amperes | 50 % more or 25 amperes |
Hydraulic system overflow valve pressure | 32888 kPa and 31371.1 kPa | 5 % more or 1516.9 kPa |
Hydraulic pump flow rate | 132 l/min and 158.4 l/min | 17 % less or 26.4 l/min |
Fuel Capacity | 120 l. and 35.7 l. | 70 % more or 84.3 l. |
Motor
Torque measured at | 1600 rev / min and 1500 rev / min | 6 % more or 100 rev |
Maximum torque | 200.7 Nm and 181 Nm | 10 % more or 19.7 Nm |
Effective power | 41.5 kW and 40.3 kW | 3 % more or 1.2 kW |
Carrier
Maximum travel speed | 5.3 km/h and 4.8 km/h | 9 % more or 0.5 km/h |
Booms/sections features 1
Maximum excavation depth | 4700 mm and 4150 mm | 12 % more or 550 mm |
Maximum vertical wall digging depth | 3810 mm and 3520 mm | 8 % more or 290 mm |
Maximum radius along ground level | 7500 mm and 6160 mm | 18 % more or 1340 mm |
Maximum loading height | 5190 mm and 5070 mm | 2 % more or 120 mm |
6 reasons to buy Hitachi EX60LC-5:
Swing device
Rotation speed | 14.5 rev / min and 11.5 rev / min | 21 % more or 3.0 rev |
Sizes
Counterweight ground clearance | 760 mm and 730 mm | 4 % more or 30 mm |
Operation
Engine oil volume | 12.5 l. and 11 l. | 12 % more or 1.5 l. |
Cooling system fluid volume | 10 l. and 8.5 l. | 15 % more or 1.5 l. |
Motor
Displacement | 3 l. and 2.2 l. | 27 % more or 0.8 l. |
Carrier
Specific ground pressure | 27.5 kPa and 28.6 kPa | 4 % less or 1.1 kPa |
Neutral reasons:
Sizes
Height to cab upper part | 2740 mm and 2570 mm |
Clearance | 360 mm and 360 mm |
Rear platform swing radius | 1790 mm and 1750 mm |
Caterpillar track length on ground level | 2240 mm and 2290 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 8590 kg and 6390 kg |
Hydraulic system fluid volume | 90 l. and 90 l. |
Motor
Power measured at | 2200 rev / min and 2200 rev / min |
Manufacturer | Isuzu and Nissan |
Aspiration | Turbocharging with intercooler and natural aspiration |
Model | AU-4LE2X and A-BD30 |
Carrier
Shoe dimensions | 600 mm and 450 mm |
Track width | 1870 mm and 1850 mm |
Booms/sections features 1
Maximum cut height | 7240 mm and 7150 mm |
Unit load-transfer height | 2940 mm and 2570 mm |
Unit load-transfer length | 7060 mm and 6080 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2490 mm | 2. Width to outside of caterpillar track | 2350 mm |
4. Caterpillar track length on ground level | 2240 mm | 4. Caterpillar track length on ground level | 2290 mm |
5. Clearance | 360 mm | 5. Clearance | 360 mm |
7. Height to cab upper part | 2740 mm | 7. Height to cab upper part | 2570 mm |
8. Rear platform swing radius | 1790 mm | 8. Rear platform swing radius | 1750 mm |
15. Counterweight ground clearance | 730 mm | 15. Counterweight ground clearance | 760 mm |
Carrier
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 450 mm |
6. Track width | 1870 mm | 6. Track width | 1850 mm |
Booms/sections features 1
13. Maximum excavation depth | 4700 mm | 13. Maximum excavation depth | 4660 mm |
1. Unit load-transfer length | 7060 mm | 1. Unit load-transfer length | 6080 mm |
3. Unit load-transfer height | 2940 mm | 3. Unit load-transfer height | 2570 mm |
9. Maximum cut height | 7240 mm | 9. Maximum cut height | 7150 mm |
10. Maximum loading height | 5190 mm | 10. Maximum loading height | 5070 mm |
11. Maximum radius along ground level | 7500 mm | 11. Maximum radius along ground level | 6160 mm |
12. Maximum vertical wall digging depth | 3810 mm | 12. Maximum vertical wall digging depth | 3520 mm |