- Home/
- Comparison/
- Medium-Sized Excavator/
- Link-Belt 80 Spin Ace vs. Hitachi ZX70LC
Link-Belt 80 Spin Ace vs. Hitachi ZX70LC
5 reasons to buy Link-Belt 80 Spin Ace:
Operation
Cooling system fluid volume | 9.6 l. and 9.5 l. | 1 % more or 0.1 l. |
Hydraulic pump flow rate | 143.1 l/min and 178.5 l/min | 20 % less or 35.4 l/min |
Booms/sections features 2
Maximum radius along ground level | 7270 mm and 6670 mm | 8 % more or 600 mm |
Booms/sections features 1
Maximum excavation depth | 4180 mm and 4170 mm | 0 % more or 10 mm |
Maximum radius along ground level | 6890 mm and 6170 mm | 10 % more or 720 mm |
15 reasons to buy Hitachi ZX70LC:
Swing device
Rotation speed | 11.3 rev / min and 10 rev / min | 12 % more or 1.3 rev |
Operation
Hydraulic system fluid volume | 100 l. and 95 l. | 5 % more or 5 l. |
Engine oil volume | 12 l. and 9.6 l. | 20 % more or 2.4 l. |
Fuel Capacity | 135 l. and 100 l. | 26 % more or 35 l. |
Hydraulic system overflow valve pressure | 31400 kPa and 29371.6 kPa | 6 % more or 2028.4 kPa |
Motor
Maximum torque | 192 Nm and 184.4 Nm | 4 % more or 7.6 Nm |
Effective power | 39 kW and 38.8 kW | 1 % more or 0.2 kW |
Carrier
Specific ground pressure | 30 kPa and 37 kPa | 19 % less or 7 kPa |
Maximum travel speed | 5 km/h and 4.8 km/h | 4 % more or 0.2 km/h |
Track shoes number per side | 40 and 39 | 2 % more or 1 |
Booms/sections features 2
Maximum loading height | 5450 mm and 4600 mm | 16 % more or 850 mm |
Maximum vertical wall digging depth | 4280 mm and 3550 mm | 17 % more or 730 mm |
Maximum excavation depth | 4670 mm and 4590 mm | 2 % more or 80 mm |
Booms/sections features 1
Maximum loading height | 5060 mm and 4390 mm | 13 % more or 670 mm |
Maximum vertical wall digging depth | 3730 mm and 3080 mm | 17 % more or 650 mm |
Neutral reasons:
Sizes
Width to outside of caterpillar track | 2320 mm and 2320 mm |
Height to cab upper part | 2700 mm and 2600 mm |
Caterpillar track length on ground level | 2210 mm and 2290 mm |
Clearance | 360 mm and 360 mm |
Operation
Working weight | 8346.1 kg and 7370 kg |
Operating voltage | 12 V and 24 V |
Motor
Cylinders number | 4 and 4 |
Manufacturer | Isuzu and Isuzu |
Model | CC-4JG1 and CC-4JG1 |
Power measured at | 2100 rev / min and 2100 rev / min |
Displacement | 3.1 l. and 3.1 l. |
Torque measured at | 1800 rev / min and 1800 rev / min |
Carrier
Track width | 1870 mm and 1870 mm |
Shoe dimensions | 450 mm and 450 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 2
Unit load-transfer height | 2700 mm and 2880 mm |
Unit load-transfer length | 6720 mm and 6120 mm |
Maximum cut height | 6600 mm and 7550 mm |
Booms/sections features 1
Unit load-transfer height | 2700 mm and 2600 mm |
Unit load-transfer length | 6630 mm and 6080 mm |
Maximum cut height | 6390 mm and 7150 mm |
Images
Sizes
5. Clearance | 360 mm | 5. Clearance | 360 mm |
7. Height to cab upper part | 2700 mm | 7. Height to cab upper part | 2600 mm |
2. Width to outside of caterpillar track | 2320 mm | 2. Width to outside of caterpillar track | 2320 mm |
4. Caterpillar track length on ground level | 2210 mm | 4. Caterpillar track length on ground level | 2290 mm |
Carrier
6. Track width | 1870 mm | 6. Track width | 1870 mm |
14. Shoe dimensions | 450 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
1. Unit load-transfer length | 6720 mm | 1. Unit load-transfer length | 6120 mm |
3. Unit load-transfer height | 2700 mm | 3. Unit load-transfer height | 2880 mm |
9. Maximum cut height | 6600 mm | 9. Maximum cut height | 7550 mm |
10. Maximum loading height | 4600 mm | 10. Maximum loading height | 5450 mm |
11. Maximum radius along ground level | 7270 mm | 11. Maximum radius along ground level | 6670 mm |
12. Maximum vertical wall digging depth | 3550 mm | 12. Maximum vertical wall digging depth | 4280 mm |
13. Maximum excavation depth | 4590 mm | 13. Maximum excavation depth | 4670 mm |