vs.

      Case CX18B serie 2 vs. Hitachi ZX40U-2

      2 reasons to buy Case CX18B serie 2:

      Operation

      Hydraulic pump flow rate 15.5 l/min and 125 l/min 88 % less or 109.5 l/min

      Motor

      Torque measured at 1800 rev / min and 1500 rev / min 17 % more or 300 rev

      19 reasons to buy Hitachi ZX40U-2:

      Sizes

      Width to outside of caterpillar track 1960 mm and 1330 mm 32 % more or 630 mm
      Counterweight ground clearance 605 mm and 440 mm 27 % more or 165 mm

      Operation

      Hydraulic system fluid volume 90 l. and 12.3 l. 86 % more or 77.7 l.
      Fuel Capacity 70 l. and 19.5 l. 72 % more or 50.5 l.
      Engine oil volume 8.6 l. and 3 l. 65 % more or 5.6 l.
      Cooling system fluid volume 6.6 l. and 3.5 l. 47 % more or 3.1 l.
      Hydraulic system overflow valve pressure 24500 kPa and 21600 kPa 12 % more or 2900 kPa

      Motor

      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev
      Maximum torque 138 Nm and 53.5 Nm 61 % more or 84.5 Nm
      Cylinders number 4 and 3 25 % more or 1

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1
      Specific ground pressure 28 kPa and 31 kPa 10 % less or 3 kPa
      Maximum travel speed 4.5 km/h and 3.5 km/h 22 % more or 1.0 km/h

      Booms/sections features 2

      Maximum excavation depth 3660 mm and 2400 mm 34 % more or 1260 mm
      Maximum loading height 4160 mm and 2600 mm 37 % more or 1560 mm
      Maximum vertical wall digging depth 2910 mm and 2260 mm 22 % more or 650 mm

      Booms/sections features 1

      Maximum excavation depth 3350 mm and 2200 mm 34 % more or 1150 mm
      Maximum loading height 3920 mm and 2470 mm 37 % more or 1450 mm
      Maximum vertical wall digging depth 2550 mm and 2060 mm 19 % more or 490 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1060 mm and 980 mm
      Caterpillar track length on ground level 1210 mm and 2000 mm
      Height to cab upper part 2350 mm and 2510 mm

      Operation

      Working weight 1780 kg and 4390 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Mitsubishi and Yanmar
      Model L3E and 4TNV88

      Carrier

      Shoe dimensions 230 mm and 400 mm
      Track width 1100 mm and 1560 mm

      Booms/sections features 2

      Unit load-transfer height 2350 mm and 2510 mm
      Unit load-transfer length 3620 mm and 5380 mm
      Maximum cut height 3680 mm and 5840 mm

      Booms/sections features 1

      Unit load-transfer length 3600 mm and 5340 mm
      Maximum cut height 3550 mm and 5600 mm
      Unit load-transfer height 2350 mm and 2510 mm

      Images

      Sizes

      7. Height to cab upper part 2350 mm 7. Height to cab upper part 2510 mm
      8. Rear platform swing radius 1060 mm 8. Rear platform swing radius 980 mm
      15. Counterweight ground clearance 440 mm 15. Counterweight ground clearance 605 mm
      2. Width to outside of caterpillar track 1330 mm 2. Width to outside of caterpillar track 1960 mm
      4. Caterpillar track length on ground level 1210 mm 4. Caterpillar track length on ground level 2000 mm

      Carrier

      6. Track width 1100 mm 6. Track width 1560 mm
      14. Shoe dimensions 230 mm 14. Shoe dimensions 400 mm

      Booms/sections features 1

      1. Unit load-transfer length 3620 mm 1. Unit load-transfer length 5380 mm
      3. Unit load-transfer height 2350 mm 3. Unit load-transfer height 2510 mm
      9. Maximum cut height 3680 mm 9. Maximum cut height 5840 mm
      10. Maximum loading height 2600 mm 10. Maximum loading height 4160 mm
      12. Maximum vertical wall digging depth 2260 mm 12. Maximum vertical wall digging depth 2910 mm
      13. Maximum excavation depth 2400 mm 13. Maximum excavation depth 3660 mm