- Home/
- Comparison/
- Mini Digger/
- Case CX31 vs. John Deere 27 ZTS
Case CX31 vs. John Deere 27 ZTS
8 reasons to buy Case CX31:
Swing device
Rotation speed | 9 rev / min and 8.1 rev / min | 10 % more or 0.9 rev |
Sizes
Counterweight ground clearance | 565 mm and 533.4 mm | 6 % more or 31.6 mm |
Width to outside of caterpillar track | 1550 mm and 509 mm | 67 % more or 1041 mm |
Operation
Hydraulic system fluid volume | 48 l. and 29.9 l. | 38 % more or 18.1 l. |
Carrier
Specific ground pressure | 29 kPa and 29.1 kPa | 0 % less or 0.1 kPa |
Booms/sections features 1
Maximum excavation depth | 2820 mm and 2642.6 mm | 6 % more or 177.4 mm |
Maximum radius along ground level | 4800 mm and 4242.8 mm | 12 % more or 557.2 mm |
Maximum loading height | 3150 mm and 2767.6 mm | 12 % more or 382.4 mm |
8 reasons to buy John Deere 27 ZTS:
Sizes
Clearance | 359.7 mm and 320 mm | 11 % more or 39.7 mm |
Operation
Fuel Capacity | 39.7 l. and 37.9 l. | 5 % more or 1.8 l. |
Generator current strength | 35 amperes and 24 amperes | 31 % more or 11 amperes |
Hydraulic pump flow rate | 45.4 l/min and 62.6 l/min | 27 % less or 17.2 l/min |
Motor
Power measured at | 2450 rev / min and 2300 rev / min | 6 % more or 150 rev |
Displacement | 1.5 l. and 1.3 l. | 13 % more or 0.2 l. |
Carrier
Maximum travel speed | 4.7 km/h and 4.5 km/h | 4 % more or 0.2 km/h |
Booms/sections features 1
Maximum vertical wall digging depth | 2642.6 mm and 2160 mm | 18 % more or 482.6 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2510 mm and 2539 mm |
Rear platform swing radius | 775 mm and 786.4 mm |
Caterpillar track length on ground level | 1540 mm and 1929.4 mm |
Operation
Working weight | 3000.1 kg and 2884.8 kg |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | Yanmar and Isuzu |
Model | 3TNE82A and 3LD1 |
Booms/sections features 1
Unit load-transfer length | 4440 mm and 1167.4 mm |
Maximum cut height | 4500 mm and 4242.8 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1550 mm | 2. Width to outside of caterpillar track | 509 mm |
4. Caterpillar track length on ground level | 1540 mm | 4. Caterpillar track length on ground level | 1929.4 mm |
5. Clearance | 320 mm | 5. Clearance | 359.7 mm |
7. Height to cab upper part | 2510 mm | 7. Height to cab upper part | 2539 mm |
8. Rear platform swing radius | 775 mm | 8. Rear platform swing radius | 786.4 mm |
15. Counterweight ground clearance | 565 mm | 15. Counterweight ground clearance | 533.4 mm |
Booms/sections features 1
11. Maximum radius along ground level | 4800 mm | 11. Maximum radius along ground level | 4242.8 mm |
12. Maximum vertical wall digging depth | 2160 mm | 12. Maximum vertical wall digging depth | 2642.6 mm |
13. Maximum excavation depth | 2820 mm | 13. Maximum excavation depth | 2642.6 mm |
1. Unit load-transfer length | 4440 mm | 1. Unit load-transfer length | 1167.4 mm |
9. Maximum cut height | 4500 mm | 9. Maximum cut height | 4242.8 mm |
10. Maximum loading height | 3150 mm | 10. Maximum loading height | 2767.6 mm |