- Home/
- Comparison/
- Mini Digger/
- Case CX31 vs. Thomas 15S
Case CX31 vs. Thomas 15S
6 reasons to buy Case CX31:
Sizes
Width to outside of caterpillar track | 1550 mm and 1020 mm | 34 % more or 530 mm |
Operation
Fuel Capacity | 37.9 l. and 23.6 l. | 38 % more or 14.3 l. |
Carrier
Maximum travel speed | 4.5 km/h and 3.9 km/h | 13 % more or 0.6 km/h |
Booms/sections features 1
Maximum excavation depth | 2820 mm and 2370 mm | 16 % more or 450 mm |
Maximum loading height | 3150 mm and 2285 mm | 27 % more or 865 mm |
Maximum vertical wall digging depth | 2160 mm and 1725 mm | 20 % more or 435 mm |
4 reasons to buy Thomas 15S:
Swing device
Rotation speed | 11.5 rev / min and 9 rev / min | 22 % more or 2.5 rev |
Operation
Hydraulic pump flow rate | 46.6 l/min and 62.6 l/min | 26 % less or 16.0 l/min |
Hydraulic system overflow valve pressure | 55888.9 kPa and 156.9 kPa | 100 % more or 55732.0 kPa |
Motor
Power measured at | 2400 rev / min and 2300 rev / min | 4 % more or 100 rev |
Neutral reasons:
Sizes
Rear platform swing radius | 775 mm and 1140 mm |
Caterpillar track length on ground level | 1540 mm and 1130 mm |
Height to cab upper part | 2510 mm and 2230 mm |
Operation
Working weight | 3000.1 kg and 1500 kg |
Motor
Manufacturer | Yanmar and Mitsubishi |
Model | 3TNE82A and L3E |
Carrier
Shoe dimensions | 300 mm and 230 mm |
Booms/sections features 1
Unit load-transfer length | 4440 mm and 3740 mm |
Maximum cut height | 4500 mm and 3355 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1550 mm | 2. Width to outside of caterpillar track | 1020 mm |
4. Caterpillar track length on ground level | 1540 mm | 4. Caterpillar track length on ground level | 1130 mm |
7. Height to cab upper part | 2510 mm | 7. Height to cab upper part | 2230 mm |
8. Rear platform swing radius | 775 mm | 8. Rear platform swing radius | 1140 mm |
Carrier
14. Shoe dimensions | 300 mm | 14. Shoe dimensions | 230 mm |
Booms/sections features 1
13. Maximum excavation depth | 2820 mm | 13. Maximum excavation depth | 2370 mm |
1. Unit load-transfer length | 4440 mm | 1. Unit load-transfer length | 3740 mm |
9. Maximum cut height | 4500 mm | 9. Maximum cut height | 3355 mm |
10. Maximum loading height | 3150 mm | 10. Maximum loading height | 2285 mm |
12. Maximum vertical wall digging depth | 2160 mm | 12. Maximum vertical wall digging depth | 1725 mm |