- Home/
- Comparison/
- Mini Digger/
- Daewoo S015P vs. Case CX36B
Daewoo S015P vs. Case CX36B
1 reasons to buy Daewoo S015P:
Swing device
Rotation speed | 11 rev / min and 8.9 rev / min | 19 % more or 2.1 rev |
9 reasons to buy Case CX36B:
Sizes
Counterweight ground clearance | 570 mm and 425 mm | 25 % more or 145 mm |
Width to outside of caterpillar track | 1700 mm and 1000 mm | 41 % more or 700 mm |
Operation
Fuel Capacity | 38 l. and 19 l. | 50 % more or 19 l. |
Hydraulic system fluid volume | 48 l. and 26 l. | 46 % more or 22 l. |
Motor
Power measured at | 2400 rev / min and 2300 rev / min | 4 % more or 100 rev |
Effective power | 21.2 kW and 12.5 kW | 41 % more or 8.7 kW |
Carrier
Maximum travel speed | 4.5 km/h and 2.2 km/h | 51 % more or 2.3 km/h |
Booms/sections features 1
Maximum excavation depth | 3080 mm and 2140 mm | 31 % more or 940 mm |
Maximum loading height | 3580 mm and 2245 mm | 37 % more or 1335 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2247 mm and 2570 mm |
Rear platform swing radius | 1190 mm and 850 mm |
Caterpillar track length on ground level | 1224 mm and 1700 mm |
Operation
Working weight | 1570 kg and 3610 kg |
Motor
Model | L3E and 3TNV88-BPYB |
Carrier
Shoe dimensions | 230 mm and 300 mm |
Booms/sections features 1
Unit load-transfer length | 3755 mm and 2570 mm |
Maximum cut height | 3400 mm and 4980 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1000 mm | 2. Width to outside of caterpillar track | 1700 mm |
4. Caterpillar track length on ground level | 1224 mm | 4. Caterpillar track length on ground level | 1700 mm |
7. Height to cab upper part | 2247 mm | 7. Height to cab upper part | 2570 mm |
8. Rear platform swing radius | 1190 mm | 8. Rear platform swing radius | 850 mm |
15. Counterweight ground clearance | 425 mm | 15. Counterweight ground clearance | 570 mm |
Carrier
14. Shoe dimensions | 230 mm | 14. Shoe dimensions | 300 mm |
Booms/sections features 1
13. Maximum excavation depth | 2140 mm | 13. Maximum excavation depth | 3080 mm |
1. Unit load-transfer length | 3755 mm | 1. Unit load-transfer length | 2570 mm |
9. Maximum cut height | 3400 mm | 9. Maximum cut height | 4980 mm |
10. Maximum loading height | 2245 mm | 10. Maximum loading height | 3580 mm |