- Home/
- Comparison/
- Mini Digger/
- Doosan DX30Z vs. JCB MICRO PLUS
Doosan DX30Z vs. JCB MICRO PLUS
17 reasons to buy Doosan DX30Z:
Swing device
Rotation speed | 9.7 rev / min and 8 rev / min | 18 % more or 1.7 rev |
Sizes
Width to outside of caterpillar track | 1550 mm and 970 mm | 37 % more or 580 mm |
Clearance | 300 mm and 215 mm | 28 % more or 85 mm |
Counterweight ground clearance | 535 mm and 395 mm | 26 % more or 140 mm |
Operation
Hydraulic system overflow valve pressure | 20500 kPa and 17650.6 kPa | 14 % more or 2849.4 kPa |
Fuel Capacity | 35 l. and 14.6 l. | 58 % more or 20.4 l. |
Hydraulic system fluid volume | 50 l. and 21 l. | 58 % more or 29 l. |
Engine oil volume | 5.5 l. and 3.5 l. | 36 % more or 2.0 l. |
Motor
Effective power | 18.1 kW and 12.7 kW | 30 % more or 5.4 kW |
Maximum torque | 87.9 Nm and 55.6 Nm | 37 % more or 32.3 Nm |
Carrier
Rolling bearings number on either side | 4 and 3 | 25 % more or 1 |
Booms/sections features 2
Maximum loading height | 3185 mm and 2625 mm | 18 % more or 560 mm |
Maximum vertical wall digging depth | 2383 mm and 1922 mm | 19 % more or 461 mm |
Maximum excavation depth | 2948 mm and 2155 mm | 27 % more or 793 mm |
Booms/sections features 1
Maximum excavation depth | 2838 mm and 1967 mm | 31 % more or 871 mm |
Maximum loading height | 3122 mm and 2475 mm | 21 % more or 647 mm |
Maximum vertical wall digging depth | 2278 mm and 1734 mm | 24 % more or 544 mm |
4 reasons to buy JCB MICRO PLUS:
Operation
Hydraulic pump flow rate | 27 l/min and 74.4 l/min | 64 % less or 47.4 l/min |
Cooling system fluid volume | 5 l. and 3.5 l. | 30 % more or 1.5 l. |
Motor
Displacement | 954 l. and 1.3 l. | 100 % more or 952.7 l. |
Torque measured at | 2000 rev / min and 1200 rev / min | 40 % more or 800 rev |
Neutral reasons:
Sizes
Height to cab upper part | 2480 mm and 2345 mm |
Rear platform swing radius | 775 mm and 900 mm |
Caterpillar track length on ground level | 1650 mm and 1008 mm |
Operation
Working weight | 3180 kg and 1312 kg |
Operating voltage | 12 V and 12 V |
Generator current strength | 40 amperes and 40 amperes |
Motor
Model | 3TNV82A-PDB and 103-10 MICRO PLUS |
Carrier
Shoe dimensions | 300 mm and 700 mm |
Track width | 1250 mm and 1000 mm |
Booms/sections features 2
Maximum cut height | 4618 mm and 3525 mm |
Booms/sections features 1
Unit load-transfer height | 1590 mm and 2345 mm |
Unit load-transfer length | 4507 mm and 3065 mm |
Maximum cut height | 4555 mm and 3375 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1550 mm | 2. Width to outside of caterpillar track | 970 mm |
4. Caterpillar track length on ground level | 1650 mm | 4. Caterpillar track length on ground level | 1008 mm |
5. Clearance | 300 mm | 5. Clearance | 215 mm |
7. Height to cab upper part | 2480 mm | 7. Height to cab upper part | 2345 mm |
8. Rear platform swing radius | 775 mm | 8. Rear platform swing radius | 900 mm |
15. Counterweight ground clearance | 535 mm | 15. Counterweight ground clearance | 395 mm |
Carrier
6. Track width | 1250 mm | 6. Track width | 1000 mm |
14. Shoe dimensions | 300 mm | 14. Shoe dimensions | 700 mm |
Booms/sections features 1
12. Maximum vertical wall digging depth | 2278 mm | 12. Maximum vertical wall digging depth | 1922 mm |
13. Maximum excavation depth | 2838 mm | 13. Maximum excavation depth | 2155 mm |
1. Unit load-transfer length | 4507 mm | 1. Unit load-transfer length | 3120 mm |
3. Unit load-transfer height | 1590 mm | 3. Unit load-transfer height | 2345 mm |
9. Maximum cut height | 4618 mm | 9. Maximum cut height | 3525 mm |
10. Maximum loading height | 3185 mm | 10. Maximum loading height | 2625 mm |