vs.

      Hitachi EX30-2 vs. Takeuchi TB014

      14 reasons to buy Hitachi EX30-2:

      Sizes

      Clearance 330 mm and 221 mm 33 % more or 109 mm

      Operation

      Hydraulic system fluid volume 40 l. and 32.9 l. 18 % more or 7.1 l.
      Generator current strength 52 amperes and 20 amperes 62 % more or 32 amperes
      Hydraulic system overflow valve pressure 22555.3 kPa and 18140.1 kPa 20 % more or 4415.2 kPa
      Fuel Capacity 50 l. and 23.1 l. 54 % more or 26.9 l.

      Motor

      Maximum torque 91.1 Nm and 51 Nm 44 % more or 40.1 Nm
      Cylinders number 4 and 3 25 % more or 1

      Carrier

      Rolling bearings number on either side 4 and 3 25 % more or 1
      Specific ground pressure 26.5 kPa and 28.6 kPa 7 % less or 2.1 kPa
      Maximum travel speed 4.5 km/h and 2.3 km/h 49 % more or 2.2 km/h

      Booms/sections features 1

      Maximum excavation depth 2885 mm and 2133.6 mm 26 % more or 751.4 mm
      Maximum radius along ground level 4810 mm and 3758.2 mm 22 % more or 1051.8 mm
      Maximum loading height 3415 mm and 2667 mm 22 % more or 748 mm
      Maximum vertical wall digging depth 2175 mm and 1700.8 mm 22 % more or 474.2 mm

      6 reasons to buy Takeuchi TB014:

      Sizes

      Width to outside of caterpillar track 3709.4 mm and 1520 mm 59 % more or 2189.4 mm

      Operation

      Engine oil volume 11.4 l. and 6.2 l. 46 % more or 5.2 l.
      Hydraulic pump flow rate 42.9 l/min and 72 l/min 40 % less or 29.1 l/min
      Cooling system fluid volume 12.5 l. and 6 l. 52 % more or 6.5 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1700 rev / min and 1500 rev / min 12 % more or 200 rev

      Neutral reasons:

      Swing device

      Rotation speed 9 rev / min and 9 rev / min

      Sizes

      Rear platform swing radius 1360 mm and 1087.1 mm
      Caterpillar track length on ground level 1595 mm and 1016 mm
      Height to cab upper part 2440 mm and 2286 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 2880 kg and 1455.1 kg

      Motor

      Model V1505-KA and 3TNE-68
      Manufacturer Kubota and Yanmar

      Carrier

      Shoe dimensions 300 mm and 228.6 mm

      Booms/sections features 1

      Maximum cut height 4745 mm and 3709.4 mm

      Images

      Sizes

      7. Height to cab upper part 2440 mm 7. Height to cab upper part 2286 mm
      8. Rear platform swing radius 1360 mm 8. Rear platform swing radius 1087.1 mm
      2. Width to outside of caterpillar track 1520 mm 2. Width to outside of caterpillar track 3709.4 mm
      4. Caterpillar track length on ground level 1595 mm 4. Caterpillar track length on ground level 1016 mm
      5. Clearance 330 mm 5. Clearance 221 mm

      Carrier

      14. Shoe dimensions 300 mm 14. Shoe dimensions 228.6 mm

      Booms/sections features 1

      9. Maximum cut height 4745 mm 9. Maximum cut height 3709.4 mm
      10. Maximum loading height 3415 mm 10. Maximum loading height 2667 mm
      11. Maximum radius along ground level 4810 mm 11. Maximum radius along ground level 3758.2 mm
      12. Maximum vertical wall digging depth 2175 mm 12. Maximum vertical wall digging depth 1700.8 mm
      13. Maximum excavation depth 2885 mm 13. Maximum excavation depth 2133.6 mm