- Home/
- Comparison/
- Mini Digger/
- Hitachi ZX8-2 vs. Terex HR1.6
Hitachi ZX8-2 vs. Terex HR1.6
5 reasons to buy Hitachi ZX8-2:
Operation
Hydraulic pump flow rate | 21.2 l/min and 53 l/min | 60 % less or 31.8 l/min |
Hydraulic system overflow valve pressure | 17700 kPa and 16512.9 kPa | 7 % more or 1187.1 kPa |
Carrier
Maximum travel speed | 4 km/h and 3 km/h | 25 % more or 1 km/h |
Booms/sections features 2
Maximum vertical wall digging depth | 1600 mm and 1200 mm | 25 % more or 400 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 1450 mm and 1100 mm | 24 % more or 350 mm |
11 reasons to buy Terex HR1.6:
Swing device
Rotation speed | 10 rev / min and 8.5 rev / min | 15 % more or 1.5 rev |
Sizes
Width to outside of caterpillar track | 1100 mm and 910 mm | 17 % more or 190 mm |
Clearance | 170 mm and 130 mm | 24 % more or 40 mm |
Operation
Hydraulic system fluid volume | 37 l. and 18 l. | 51 % more or 19 l. |
Fuel Capacity | 31 l. and 16 l. | 48 % more or 15 l. |
Motor
Power measured at | 2400 rev / min and 2100 rev / min | 12 % more or 300 rev |
Maximum torque | 54 Nm and 50.5 Nm | 6 % more or 3.5 Nm |
Booms/sections features 2
Maximum excavation depth | 2400 mm and 1800 mm | 25 % more or 600 mm |
Maximum loading height | 2400 mm and 2150 mm | 10 % more or 250 mm |
Booms/sections features 1
Maximum excavation depth | 2200 mm and 1600 mm | 27 % more or 600 mm |
Maximum loading height | 2300 mm and 2050 mm | 11 % more or 250 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1090 mm and 1100 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 1100 kg and 1660 kg |
Motor
Manufacturer | Yanmar and Mitsubishi |
Model | 3TNV70 and L3E-W 262 KL |
Torque measured at | 1500 rev / min and 1500 rev / min |
Booms/sections features 2
Maximum cut height | 2940 mm and 3500 mm |
Booms/sections features 1
Maximum cut height | 2840 mm and 3400 mm |
Images
Sizes
5. Clearance | 130 mm | 5. Clearance | 170 mm |
8. Rear platform swing radius | 1090 mm | 8. Rear platform swing radius | 1100 mm |
2. Width to outside of caterpillar track | 910 mm | 2. Width to outside of caterpillar track | 1100 mm |
Booms/sections features 1
9. Maximum cut height | 2940 mm | 9. Maximum cut height | 3500 mm |
10. Maximum loading height | 2150 mm | 10. Maximum loading height | 2400 mm |
12. Maximum vertical wall digging depth | 1600 mm | 12. Maximum vertical wall digging depth | 1200 mm |
13. Maximum excavation depth | 1800 mm | 13. Maximum excavation depth | 2400 mm |