- Home/
- Comparison/
- Mini Digger/
- Hyundai R16-7 vs. Thomas 25
Hyundai R16-7 vs. Thomas 25
3 reasons to buy Hyundai R16-7:
Swing device
Rotation speed | 11.5 rev / min and 10.3 rev / min | 10 % more or 1.2 rev |
Operation
Hydraulic pump flow rate | 47.1 l/min and 89.3 l/min | 47 % less or 42.2 l/min |
Motor
Power measured at | 2400 rev / min and 2100 rev / min | 12 % more or 300 rev |
7 reasons to buy Thomas 25:
Sizes
Width to outside of caterpillar track | 1470 mm and 1300 mm | 12 % more or 170 mm |
Operation
Fuel Capacity | 40.1 l. and 20 l. | 50 % more or 20.1 l. |
Hydraulic system overflow valve pressure | 58336.5 kPa and 18615.8 kPa | 68 % more or 39720.7 kPa |
Carrier
Maximum travel speed | 4 km/h and 3.9 km/h | 2 % more or 0.1 km/h |
Booms/sections features 1
Maximum excavation depth | 2900 mm and 2350 mm | 19 % more or 550 mm |
Maximum loading height | 3225 mm and 2310 mm | 28 % more or 915 mm |
Maximum vertical wall digging depth | 2140 mm and 1705 mm | 20 % more or 435 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2260 mm and 2305 mm |
Rear platform swing radius | 1630 mm and 1360 mm |
Caterpillar track length on ground level | 1130 mm and 1363 mm |
Operation
Working weight | 1630.2 kg and 2650 kg |
Motor
Manufacturer | Mitsubishi and Isuzu |
Model | L3E-W231 and 3LD1PA-04 |
Carrier
Track width | 1020 mm and 1170 mm |
Shoe dimensions | 228.6 mm and 300 mm |
Booms/sections features 1
Unit load-transfer length | 3740 mm and 4455 mm |
Maximum cut height | 3365 mm and 4575 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1300 mm | 2. Width to outside of caterpillar track | 1470 mm |
4. Caterpillar track length on ground level | 1130 mm | 4. Caterpillar track length on ground level | 1363 mm |
7. Height to cab upper part | 2260 mm | 7. Height to cab upper part | 2305 mm |
8. Rear platform swing radius | 1630 mm | 8. Rear platform swing radius | 1360 mm |
Carrier
6. Track width | 1020 mm | 6. Track width | 1170 mm |
14. Shoe dimensions | 228.6 mm | 14. Shoe dimensions | 300 mm |
Booms/sections features 1
1. Unit load-transfer length | 3740 mm | 1. Unit load-transfer length | 4455 mm |
9. Maximum cut height | 3365 mm | 9. Maximum cut height | 4575 mm |
10. Maximum loading height | 2310 mm | 10. Maximum loading height | 3225 mm |
12. Maximum vertical wall digging depth | 1705 mm | 12. Maximum vertical wall digging depth | 2140 mm |
13. Maximum excavation depth | 2350 mm | 13. Maximum excavation depth | 2900 mm |