- Home/
- Comparison/
- Mini Digger/
- Hyundai R35Z-7 vs. Pel-Job EB300
Hyundai R35Z-7 vs. Pel-Job EB300
14 reasons to buy Hyundai R35Z-7:
Sizes
Clearance | 290 mm and 280 mm | 3 % more or 10 mm |
Width to outside of caterpillar track | 1740 mm and 1480 mm | 15 % more or 260 mm |
Operation
Engine oil volume | 6.7 l. and 5.2 l. | 22 % more or 1.5 l. |
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Motor
Maximum torque | 105.8 Nm and 77 Nm | 27 % more or 28.8 Nm |
Full power | 20.4 kW and 20.3 kW | 0 % more or 0.1 kW |
Effective power | 19.8 kW and 17.2 kW | 13 % more or 2.6 kW |
Displacement | 1.6 l. and 1.3 l. | 19 % more or 0.3 l. |
Carrier
Rolling bearings number on either side | 4 and 3 | 25 % more or 1 |
Maximum travel speed | 4.5 km/h and 3.5 km/h | 22 % more or 1.0 km/h |
Booms/sections features 1
Maximum radius along ground level | 5240 mm and 4460 mm | 15 % more or 780 mm |
Maximum loading height | 3450 mm and 3130 mm | 9 % more or 320 mm |
Maximum vertical wall digging depth | 2190 mm and 2000 mm | 9 % more or 190 mm |
Maximum excavation depth | 3150 mm and 2520 mm | 20 % more or 630 mm |
9 reasons to buy Pel-Job EB300:
Swing device
Rotation speed | 10 rev / min and 9.5 rev / min | 5 % more or 0.5 rev |
Sizes
Counterweight ground clearance | 570 mm and 540 mm | 5 % more or 30 mm |
Operation
Hydraulic pump flow rate | 42.6 l/min and 77 l/min | 45 % less or 34.4 l/min |
Fuel Capacity | 49 l. and 42 l. | 14 % more or 7 l. |
Cooling system fluid volume | 6 l. and 5 l. | 17 % more or 1 l. |
Hydraulic system fluid volume | 48 l. and 46 l. | 4 % more or 2 l. |
Hydraulic system overflow valve pressure | 23000 kPa and 22550 kPa | 2 % more or 450 kPa |
Motor
Power measured at | 2800 rev / min and 2200 rev / min | 21 % more or 600 rev |
Torque measured at | 1600 rev / min and 1200 rev / min | 25 % more or 400 rev |
Neutral reasons:
Sizes
Height to cab upper part | 2500 mm and 2390 mm |
Rear platform swing radius | 870 mm and 1260 mm |
Caterpillar track length on ground level | 1700 mm and 1440 mm |
Operation
Working weight | 3650 kg and 2725 kg |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | Yanmar and Mitsubishi |
Model | 3TNV88 and S3L2 |
Carrier
Support rollers number on either side | 1 and 1 |
Booms/sections features 1
Maximum cut height | 4830 mm and 4330 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1740 mm | 2. Width to outside of caterpillar track | 1480 mm |
4. Caterpillar track length on ground level | 1700 mm | 4. Caterpillar track length on ground level | 1440 mm |
5. Clearance | 290 mm | 5. Clearance | 280 mm |
7. Height to cab upper part | 2500 mm | 7. Height to cab upper part | 2390 mm |
8. Rear platform swing radius | 870 mm | 8. Rear platform swing radius | 1260 mm |
15. Counterweight ground clearance | 540 mm | 15. Counterweight ground clearance | 570 mm |
Booms/sections features 1
9. Maximum cut height | 4830 mm | 9. Maximum cut height | 4520 mm |
10. Maximum loading height | 3450 mm | 10. Maximum loading height | 3320 mm |
11. Maximum radius along ground level | 5240 mm | 11. Maximum radius along ground level | 4750 mm |
12. Maximum vertical wall digging depth | 2190 mm | 12. Maximum vertical wall digging depth | 2290 mm |
13. Maximum excavation depth | 3150 mm | 13. Maximum excavation depth | 2820 mm |