- Home/
- Comparison/
- Mini Digger/
- Pel-Job EB250 vs. Caterpillar 301.6C
Pel-Job EB250 vs. Caterpillar 301.6C
19 reasons to buy Pel-Job EB250:
Sizes
Width to outside of caterpillar track | 1480 mm and 975 mm | 34 % more or 505 mm |
Counterweight ground clearance | 570 mm and 435 mm | 24 % more or 135 mm |
Operation
Hydraulic system overflow valve pressure | 23000 kPa and 20600 kPa | 10 % more or 2400 kPa |
Fuel Capacity | 49 l. and 22 l. | 55 % more or 27 l. |
Cooling system fluid volume | 6 l. and 4 l. | 33 % more or 2 l. |
Hydraulic system fluid volume | 48 l. and 37 l. | 23 % more or 11 l. |
Engine oil volume | 5.2 l. and 4.1 l. | 21 % more or 1.1 l. |
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Motor
Full power | 20.3 kW and 14 kW | 31 % more or 6.3 kW |
Effective power | 17.2 kW and 13.7 kW | 20 % more or 3.5 kW |
Power measured at | 2800 rev / min and 2400 rev / min | 14 % more or 400 rev |
Booms/sections features 2
Maximum excavation depth | 2820 mm and 1810 mm | 36 % more or 1010 mm |
Maximum radius along ground level | 4750 mm and 3800 mm | 20 % more or 950 mm |
Maximum loading height | 3320 mm and 2480 mm | 25 % more or 840 mm |
Maximum vertical wall digging depth | 2290 mm and 1810 mm | 21 % more or 480 mm |
Booms/sections features 1
Maximum loading height | 3130 mm and 2360 mm | 25 % more or 770 mm |
Maximum vertical wall digging depth | 2000 mm and 1620 mm | 19 % more or 380 mm |
Maximum excavation depth | 2520 mm and 2080 mm | 17 % more or 440 mm |
Maximum radius along ground level | 4460 mm and 3610 mm | 19 % more or 850 mm |
3 reasons to buy Caterpillar 301.6C:
Swing device
Rotation speed | 10.5 rev / min and 10 rev / min | 5 % more or 0.5 rev |
Operation
Hydraulic pump flow rate | 39.6 l/min and 42.6 l/min | 7 % less or 3.0 l/min |
Carrier
Maximum travel speed | 4.5 km/h and 3.5 km/h | 22 % more or 1.0 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 2390 mm and 2190 mm |
Rear platform swing radius | 1260 mm and 1090 mm |
Caterpillar track length on ground level | 1440 mm and 1575 mm |
Operation
Working weight | 2725 kg and 1720 kg |
Operating voltage | 12 V and 12 V |
Motor
Manufacturer | Mitsubishi and Mitsubishi |
Model | S3L2 and L3E |
Cylinders number | 3 and 3 |
Carrier
Shoe dimensions | 300 mm and 230 mm |
Booms/sections features 2
Unit load-transfer height | 2390 mm and 2190 mm |
Maximum cut height | 4520 mm and 3460 mm |
Unit load-transfer length | 4220 mm and 3695 mm |
Booms/sections features 1
Unit load-transfer height | 2390 mm and 2790 mm |
Unit load-transfer length | 4220 mm and 3695 mm |
Maximum cut height | 4330 mm and 3350 mm |
Images
Sizes
15. Counterweight ground clearance | 570 mm | 15. Counterweight ground clearance | 435 mm |
2. Width to outside of caterpillar track | 1480 mm | 2. Width to outside of caterpillar track | 975 mm |
4. Caterpillar track length on ground level | 1440 mm | 4. Caterpillar track length on ground level | 1575 mm |
7. Height to cab upper part | 2390 mm | 7. Height to cab upper part | 2190 mm |
8. Rear platform swing radius | 1260 mm | 8. Rear platform swing radius | 1090 mm |
Carrier
14. Shoe dimensions | 300 mm | 14. Shoe dimensions | 230 mm |
Booms/sections features 1
10. Maximum loading height | 3130 mm | 10. Maximum loading height | 2480 mm |
1. Unit load-transfer length | 4220 mm | 1. Unit load-transfer length | 3695 mm |
11. Maximum radius along ground level | 4460 mm | 11. Maximum radius along ground level | 3800 mm |
3. Unit load-transfer height | 2390 mm | 3. Unit load-transfer height | 2190 mm |
12. Maximum vertical wall digging depth | 2000 mm | 12. Maximum vertical wall digging depth | 1810 mm |
9. Maximum cut height | 4520 mm | 9. Maximum cut height | 3460 mm |
13. Maximum excavation depth | 2520 mm | 13. Maximum excavation depth | 1810 mm |