- Home/
- Comparison/
- Mini Digger/
- Pel-Job EB450XT vs. Case CX40B ZTS
Pel-Job EB450XT vs. Case CX40B ZTS
10 reasons to buy Pel-Job EB450XT:
Swing device
Rotation speed | 10 rev / min and 8.8 rev / min | 12 % more or 1.2 rev |
Sizes
Counterweight ground clearance | 650 mm and 635 mm | 2 % more or 15 mm |
Operation
Cooling system fluid volume | 8 l. and 6 l. | 25 % more or 2 l. |
Engine oil volume | 7.7 l. and 7.4 l. | 4 % more or 0.3 l. |
Hydraulic system overflow valve pressure | 26000 kPa and 23000 kPa | 12 % more or 3000 kPa |
Hydraulic pump flow rate | 99 l/min and 148 l/min | 33 % less or 49 l/min |
Fuel Capacity | 66 l. and 53 l. | 20 % more or 13 l. |
Motor
Power measured at | 2600 rev / min and 2400 rev / min | 8 % more or 200 rev |
Displacement | 2.3 l. and 2.2 l. | 4 % more or 0.1 l. |
Carrier
Maximum travel speed | 4.3 km/h and 4.2 km/h | 2 % more or 0.1 km/h |
15 reasons to buy Case CX40B ZTS:
Sizes
Width to outside of caterpillar track | 1960 mm and 1800 mm | 8 % more or 160 mm |
Clearance | 345 mm and 320 mm | 7 % more or 25 mm |
Operation
Hydraulic system fluid volume | 63 l. and 62 l. | 2 % more or 1 l. |
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Motor
Effective power | 32.1 kW and 27.6 kW | 14 % more or 4.5 kW |
Torque measured at | 1440 rev / min and 1400 rev / min | 3 % more or 40 rev |
Maximum torque | 139.3 Nm and 137 Nm | 2 % more or 2.3 Nm |
Booms/sections features 2
Maximum excavation depth | 3660 mm and 3620 mm | 1 % more or 40 mm |
Maximum radius along ground level | 5920 mm and 5570 mm | 6 % more or 350 mm |
Maximum loading height | 4100 mm and 3810 mm | 7 % more or 290 mm |
Maximum vertical wall digging depth | 2910 mm and 2550 mm | 12 % more or 360 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 2630 mm and 2310 mm | 12 % more or 320 mm |
Maximum excavation depth | 3390 mm and 3320 mm | 2 % more or 70 mm |
Maximum radius along ground level | 5660 mm and 5280 mm | 7 % more or 380 mm |
Maximum loading height | 3910 mm and 3640 mm | 7 % more or 270 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1360 mm and 980 mm |
Caterpillar track length on ground level | 1770 mm and 1820 mm |
Height to cab upper part | 2510 mm and 2600 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 4387 kg and 4300 kg |
Motor
Model | K4N and 4TNV88A-XYB |
Cylinders number | 4 and 4 |
Booms/sections features 2
Maximum cut height | 5110 mm and 5680 mm |
Booms/sections features 1
Maximum cut height | 4930 mm and 5490 mm |
Images
Sizes
2. Width to outside of caterpillar track | 1800 mm | 2. Width to outside of caterpillar track | 1960 mm |
4. Caterpillar track length on ground level | 1770 mm | 4. Caterpillar track length on ground level | 1820 mm |
5. Clearance | 320 mm | 5. Clearance | 345 mm |
7. Height to cab upper part | 2510 mm | 7. Height to cab upper part | 2600 mm |
8. Rear platform swing radius | 1360 mm | 8. Rear platform swing radius | 980 mm |
15. Counterweight ground clearance | 650 mm | 15. Counterweight ground clearance | 635 mm |
Booms/sections features 1
9. Maximum cut height | 5110 mm | 9. Maximum cut height | 5680 mm |
10. Maximum loading height | 3810 mm | 10. Maximum loading height | 4100 mm |
11. Maximum radius along ground level | 5570 mm | 11. Maximum radius along ground level | 5920 mm |
12. Maximum vertical wall digging depth | 2550 mm | 12. Maximum vertical wall digging depth | 2910 mm |
13. Maximum excavation depth | 3620 mm | 13. Maximum excavation depth | 3660 mm |