- Home/
- Comparison/
- Wheeled Excavator/
- Case WX145 vs. Caterpillar M316C
Case WX145 vs. Caterpillar M316C
22 reasons to buy Caterpillar M316C:
Swing device
Rotation speed | 10.5 rev / min and 9 rev / min | 14 % more or 1.5 rev |
Swing torque | 40100 Nm and 36000 Nm | 10 % more or 4100 Nm |
Sizes
Clearance | 375 mm and 370 mm | 1 % more or 5 mm |
Upper structure clearance | 1280 mm and 1230 mm | 4 % more or 50 mm |
Operation
Fuel Capacity | 310 l. and 210 l. | 32 % more or 100 l. |
Cooling system fluid volume | 39 l. and 26 l. | 33 % more or 13 l. |
Hydraulic system fluid volume | 230 l. and 110 l. | 52 % more or 120 l. |
Generator current strength | 75 amperes and 70 amperes | 7 % more or 5 amperes |
Hydraulic system overflow valve pressure | 35000 kPa and 34500 kPa | 1 % more or 500 kPa |
Hydraulic pump flow rate | 245 l/min and 330 l/min | 26 % less or 85 l/min |
Motor
Displacement | 6 l. and 3.9 l. | 35 % more or 2.1 l. |
Effective power | 104.4 kW and 87.2 kW | 16 % more or 17.2 kW |
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Maximum travel speed | 34 km/h and 30 km/h | 12 % more or 4 km/h |
Boom/section options 2
Maximum excavation depth | 5870 mm and 5100 mm | 13 % more or 770 mm |
Maximum loading height | 7160 mm and 6000 mm | 16 % more or 1160 mm |
Maximum radius along ground level | 9190 mm and 8200 mm | 11 % more or 990 mm |
Maximum vertical wall digging depth | 3900 mm and 3500 mm | 10 % more or 400 mm |
Boom/section options 1
Maximum radius along ground level | 8910 mm and 8000 mm | 10 % more or 910 mm |
Maximum loading height | 6970 mm and 6000 mm | 14 % more or 970 mm |
Maximum vertical wall digging depth | 3700 mm and 3600 mm | 3 % more or 100 mm |
Maximum excavation depth | 5570 mm and 4800 mm | 14 % more or 770 mm |
Neutral reasons:
Sizes
Overall width | 2540 mm and 2550 mm |
Overall width with lowered supports | 3910 mm and 3676 mm |
Height to cab upper part | 3050 mm and 3170 mm |
Wheelbase | 2550 mm and 2600 mm |
Rear platform swing radius | 1850 mm and 2290 mm |
Operation
Tyre size | 19-19.5XF and 10.00-20 |
Engine oil volume | 16 l. and 16 l. |
Motor
Power measured at | 2000 rev / min and 2000 rev / min |
Manufacturer | Case and Caterpillar |
Model | 439TA-M2 and 3056E DIT ATAAC |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Gear box
Transmission type | powershift and Hydro-Static Transmission |
Forward gears number | 2 and 2 |
Reverse gears number | 2 and 2 |
Boom/section options 2
Maximum cut height | 8400 mm and 10250 mm |
Option - Boom/Section (MEX) 2 | Monoblock boom 4.65 m with excavator bucket 2.30 m and VA Boom 5200mm / Section 2400mm |
Boom/section options 1
Maximum cut height | 8400 mm and 10060 mm |
Option - Boom/Section (MEX) 1 | Monoblock boom 4.65 m with excavator bucket 2.00 m and VA Boom 5200mm / Section 2100mm |
Images
Sizes
6. Overall width with lowered supports | 3910 mm | 6. Overall width with lowered supports | 3676 mm |
7. Height to cab upper part | 3050 mm | 7. Height to cab upper part | 3170 mm |
8. Rear platform swing radius | 1850 mm | 8. Rear platform swing radius | 2290 mm |
14. Upper structure clearance | 1230 mm | 14. Upper structure clearance | 1280 mm |
2. Overall width | 2540 mm | 2. Overall width | 2550 mm |
4. Wheelbase | 2550 mm | 4. Wheelbase | 2600 mm |
5. Clearance | 370 mm | 5. Clearance | 375 mm |
Boom/section options 1
9. Maximum cut height | 8400 mm | 9. Maximum cut height | 10250 mm |
10. Maximum loading height | 6000 mm | 10. Maximum loading height | 7160 mm |
11. Maximum radius along ground level | 8200 mm | 11. Maximum radius along ground level | 9190 mm |
12. Maximum vertical wall digging depth | 3500 mm | 12. Maximum vertical wall digging depth | 3900 mm |
13. Maximum excavation depth | 5100 mm | 13. Maximum excavation depth | 5870 mm |