vs.

      Case WX145 vs. Liebherr A900CUS

      5 reasons to buy Case WX145:

      Swing device

      Swing torque 26552.2 lb / ft and 31 lb / ft 100 % more or 26521.2 lb

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Hydraulic system overflow valve pressure 34500 kPa and 243 kPa 99 % more or 34257 kPa

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Gear box

      Maximum travel speed 30 km/h and 28 km/h 7 % more or 2 km/h

      14 reasons to buy Liebherr A900CUS:

      Sizes

      Clearance 381 mm and 370 mm 3 % more or 11 mm
      Upper structure clearance 1243.6 mm and 1230 mm 1 % more or 13.6 mm

      Operation

      Fuel Capacity 299 l. and 210 l. 30 % more or 89 l.
      Hydraulic pump flow rate 268.8 l/min and 330 l/min 19 % less or 61.2 l/min
      Hydraulic system fluid volume 321.8 l. and 110 l. 66 % more or 211.8 l.

      Motor

      Displacement 6.6 l. and 3.9 l. 41 % more or 2.7 l.

      Boom/section options 2

      Maximum radius along ground level 8991.6 mm and 8200 mm 9 % more or 791.6 mm
      Maximum loading height 7339.6 mm and 6000 mm 18 % more or 1339.6 mm
      Maximum vertical wall digging depth 3962.4 mm and 3500 mm 12 % more or 462.4 mm
      Maximum excavation depth 5510.8 mm and 5100 mm 7 % more or 410.8 mm

      Boom/section options 1

      Maximum loading height 7187.2 mm and 6000 mm 17 % more or 1187.2 mm
      Maximum vertical wall digging depth 3810 mm and 3600 mm 6 % more or 210 mm
      Maximum excavation depth 5309.6 mm and 4800 mm 10 % more or 509.6 mm
      Maximum radius along ground level 8787.4 mm and 8000 mm 9 % more or 787.4 mm

      Neutral reasons:

      Swing device

      Rotation speed 9 rev / min and 9 rev / min

      Sizes

      Overall width 2540 mm and 2490.2 mm
      Overall width with lowered supports 3910 mm and 3682 mm
      Wheelbase 2550 mm and 2539 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 19-19.5XF and 10.00-20

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and Direct injection with turbocharging and charge air cooling, a reduced amount of emissions
      Manufacturer Case and Liebherr
      Model 439TA-M2 and D924 TI-E

      Gear box

      Transmission type powershift and oversized 2-speed gearbox with shift under full load with an extra low gear
      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Boom/section options 2

      Maximum cut height 8400 mm and 10210.8 mm
      Option - Boom/Section (MEX) 2 Monoblock boom 4.65 m with excavator bucket 2.30 m and 11.17 boom / 8 ft. Section

      Boom/section options 1

      Option - Boom/Section (MEX) 1 Monoblock boom 4.65 m with excavator bucket 2.00 m and 11.17 ft. boom / 7.42 ft. Section
      Maximum cut height 8400 mm and 10058.4 mm

      Images

      Sizes

      6. Overall width with lowered supports 3910 mm 6. Overall width with lowered supports 3682 mm
      14. Upper structure clearance 1230 mm 14. Upper structure clearance 1243.6 mm
      2. Overall width 2540 mm 2. Overall width 2490.2 mm
      4. Wheelbase 2550 mm 4. Wheelbase 2539 mm
      5. Clearance 370 mm 5. Clearance 381 mm

      Boom/section options 1

      12. Maximum vertical wall digging depth 3500 mm 12. Maximum vertical wall digging depth 3962.4 mm
      13. Maximum excavation depth 5100 mm 13. Maximum excavation depth 5510.8 mm
      9. Maximum cut height 8400 mm 9. Maximum cut height 10058.4 mm
      10. Maximum loading height 6000 mm 10. Maximum loading height 7187.2 mm
      11. Maximum radius along ground level 8200 mm 11. Maximum radius along ground level 8787.4 mm