vs.

      JCB JS160W vs. Terex HML42

      10 reasons to buy JCB JS160W:

      Swing device

      Rotation speed 11.3 rev / min and 10 rev / min 12 % more or 1.3 rev

      Operation

      Hydraulic system overflow valve pressure 34301.4 kPa and 27992.7 kPa 18 % more or 6308.7 kPa

      Motor

      Effective power 81.3 kW and 67.9 kW 16 % more or 13.4 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 4.3 l. and 4 l. 7 % more or 0.3 l.

      Gear box

      Maximum travel speed 25 km/h and 20 km/h 20 % more or 5 km/h

      Boom/section options 1

      Maximum excavation depth 5425 mm and 4315 mm 20 % more or 1110 mm
      Maximum radius along ground level 8455 mm and 8300 mm 2 % more or 155 mm
      Maximum loading height 6405 mm and 6040 mm 6 % more or 365 mm
      Maximum vertical wall digging depth 4490 mm and 3665 mm 18 % more or 825 mm

      3 reasons to buy Terex HML42:

      Sizes

      Clearance 440 mm and 350 mm 20 % more or 90 mm

      Operation

      Hydraulic system fluid volume 190 l. and 124 l. 35 % more or 66 l.
      Hydraulic pump flow rate 200.2 l/min and 276 l/min 27 % less or 75.8 l/min

      Neutral reasons:

      Sizes

      Height to cab upper part 3070 mm and 3000 mm

      Operation

      Operating voltage 24 V and 12 V
      Fuel Capacity 240 l. and 240 l.
      Type of hydraulic pump hydraulic system with load sensing with dual piston variable displacement pumps providing flow on demand for maximum productivity and load-sensing axial piston pump
      Oscillatory axle angle 17 degrees and 26 degrees
      Tyre size dual: 10x20 16PR, single: 18R19.5 (Radial) and 9-20

      Motor

      Manufacturer Isuzu and Deutz
      Model 4BGITRA-05 2 level and BF4 M 2012

      Gear box

      Transmission type hydrostatic powershift transmission and hydrostatic
      Forward gears number 2 and 2
      Reverse gears number 2 and 2

      Boom/section options 1

      Option - Boom/Section (MEX) 1 Monoblock boom with excavator bucket with lever 2250mm and two-piece articulated boom with dipper 2000mm
      Maximum cut height 9195 mm and 8240 mm

      Images

      Sizes

      5. Clearance 350 mm 5. Clearance 440 mm
      7. Height to cab upper part 3070 mm 7. Height to cab upper part 3000 mm

      Boom/section options 1

      9. Maximum cut height 9625 mm 9. Maximum cut height 8240 mm
      10. Maximum loading height 6775 mm 10. Maximum loading height 6040 mm
      11. Maximum radius along ground level 8875 mm 11. Maximum radius along ground level 8300 mm
      12. Maximum vertical wall digging depth 5050 mm 12. Maximum vertical wall digging depth 3665 mm
      13. Maximum excavation depth 5875 mm 13. Maximum excavation depth 4315 mm