vs.

      Liebherr A900C vs. Caterpillar 214

      12 reasons to buy Liebherr A900C:

      Operation

      Hydraulic system overflow valve pressure 35000 kPa and 30000 kPa 14 % more or 5000 kPa
      Fuel Capacity 300 l. and 200 l. 33 % more or 100 l.

      Motor

      Displacement 6.6 l. and 5.8 l. 12 % more or 0.8 l.
      Effective power 89.5 kW and 76.1 kW 15 % more or 13.4 kW

      Boom/section options 4

      Maximum excavation depth 5400 mm and 4500 mm 17 % more or 900 mm
      Maximum radius along ground level 8700 mm and 8350 mm 4 % more or 350 mm

      Boom/section options 3

      Maximum radius along ground level 9400 mm and 8810 mm 6 % more or 590 mm

      Boom/section options 2

      Maximum excavation depth 5700 mm and 5380 mm 6 % more or 320 mm
      Maximum radius along ground level 9200 mm and 8520 mm 7 % more or 680 mm

      Boom/section options 1

      Maximum excavation depth 5500 mm and 4910 mm 11 % more or 590 mm
      Maximum radius along ground level 9000 mm and 8000 mm 11 % more or 1000 mm
      Maximum loading height 7400 mm and 5500 mm 26 % more or 1900 mm

      7 reasons to buy Caterpillar 214:

      Swing device

      Rotation speed 9.8 rev / min and 9 rev / min 8 % more or 0.8 rev

      Sizes

      Clearance 340 mm and 30 mm 91 % more or 310 mm

      Operation

      Hydraulic pump flow rate 170 l/min and 270 l/min 37 % less or 100 l/min

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Power measured at 2150 rev / min and 1800 rev / min 16 % more or 350 rev

      Boom/section options 4

      Maximum loading height 6690 mm and 6200 mm 7 % more or 490 mm

      Boom/section options 3

      Maximum excavation depth 5920 mm and 5900 mm 0 % more or 20 mm

      Neutral reasons:

      Sizes

      Wheelbase 2540 mm and 2500 mm
      Overall width 2550 mm and 2490 mm
      Overall width with lowered supports 3690 mm and 3420 mm
      Upper structure clearance 1235 mm and 1235 mm
      Height to cab upper part 3160 mm and 3136 mm
      Rear platform swing radius 2275 mm and 2300 mm

      Operation

      Type of hydraulic pump Variable Displacement Axial Cam Pump and two variable displacement piston pumps
      Tyre size 10.00-20 and dual 10.00-20
      Hydraulic system fluid volume 320 l. and 320 l.
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and subsequent cooling, reduced amount of emissions and natural aspiration
      Manufacturer Liebherr and Perkins
      Model D 924 TI-E and 6.354.4P

      Gear box

      Transmission type oversized 2-speed gearbox with shift under full load with an extra low gear and Fully hydrostatic
      Maximum travel speed 20 km/h and 20 km/h

      Boom/section options 4

      Option - Boom/Section (MEX) 4 5 m boom / 2.25 Section and two-piece boom/Section 5'11" (1800mm)
      Unit load-transfer height 3160 mm and 3136 mm
      Unit load-transfer length 8450 mm and 8240 mm
      Maximum cut height 9000 mm and 8780 mm

      Boom/section options 3

      Option - Boom/Section (MEX) 3 3.6 m boom / 2.65 m Section and one-piece boom/Section 9'2" (2800mm)
      Unit load-transfer height 3160 mm and 3136 mm
      Unit load-transfer length 8700 mm and 8300 mm

      Boom/section options 2

      Maximum cut height 10350 mm and 7600 mm
      Option - Boom/Section (MEX) 2 3.6 m boom / 2.45 m Section and one-piece boom/Section 7'6.5" (2300mm)
      Unit load-transfer height 3160 mm and 3136 mm
      Unit load-transfer length 8750 mm and 8280 mm

      Boom/section options 1

      Unit load-transfer height 3160 mm and 3136 mm
      Unit load-transfer length 8750 mm and 8240 mm
      Option - Boom/Section (MEX) 1 3.6 m boom / 2.25 m Section and one-piece boom/Section 5'11" (1800mm)
      Maximum cut height 10200 mm and 7500 mm

      Images

      Sizes

      2. Overall width 2550 mm 2. Overall width 2490 mm
      4. Wheelbase 2540 mm 4. Wheelbase 2500 mm
      5. Clearance 30 mm 5. Clearance 340 mm
      6. Overall width with lowered supports 3690 mm 6. Overall width with lowered supports 3420 mm
      7. Height to cab upper part 3160 mm 7. Height to cab upper part 3136 mm
      8. Rear platform swing radius 2275 mm 8. Rear platform swing radius 2300 mm
      14. Upper structure clearance 1235 mm 14. Upper structure clearance 1235 mm

      Boom/section options 1

      9. Maximum cut height 10350 mm 9. Maximum cut height 7500 mm
      11. Maximum radius along ground level 9200 mm 11. Maximum radius along ground level 8000 mm
      13. Maximum excavation depth 5500 mm 13. Maximum excavation depth 4910 mm
      1. Unit load-transfer length 8750 mm 1. Unit load-transfer length 8280 mm
      3. Unit load-transfer height 3160 mm 3. Unit load-transfer height 3136 mm
      10. Maximum loading height 7550 mm 10. Maximum loading height 5500 mm