- Home/
- Comparison/
- Wheeled Excavator/
- Terex TW110 vs. New Holland MHPlusC
Terex TW110 vs. New Holland MHPlusC
4 reasons to buy Terex TW110:
Swing device
Rotation speed | 10 rev / min and 9 rev / min | 10 % more or 1 rev |
Sizes
Clearance | 440 mm and 340 mm | 23 % more or 100 mm |
Operation
Generator current strength | 600 amperes and 70 amperes | 88 % more or 530 amperes |
Hydraulic pump flow rate | 200 l/min and 252 l/min | 21 % less or 52 l/min |
9 reasons to buy New Holland MHPlusC:
Operation
Fuel Capacity | 250 l. and 240 l. | 4 % more or 10 l. |
Hydraulic system fluid volume | 240 l. and 190 l. | 21 % more or 50 l. |
Hydraulic system overflow valve pressure | 35000 kPa and 27992.7 kPa | 20 % more or 7007.3 kPa |
Motor
Effective power | 119.3 kW and 67 kW | 44 % more or 52.3 kW |
Displacement | 5.9 l. and 4 l. | 32 % more or 1.9 l. |
Gear box
Maximum travel speed | 37 km/h and 20 km/h | 46 % more or 17 km/h |
Boom/section options 1
Maximum excavation depth | 5510 mm and 4315 mm | 22 % more or 1195 mm |
Maximum loading height | 6495 mm and 6040 mm | 7 % more or 455 mm |
Maximum vertical wall digging depth | 4535 mm and 3665 mm | 19 % more or 870 mm |
Neutral reasons:
Sizes
Wheelbase | 2600 mm and 2550 mm |
Overall width | 2500 mm and 2530 mm |
Height to cab upper part | 3000 mm and 3140 mm |
Operation
Oscillatory axle angle | 13 degrees and 14 degrees |
Tyre size | 9.00-20, 14 PR Twin Tires and 10.00-20 |
Operating voltage | 12 V and 24 V |
Motor
Model | BF4 M 2012 and CNH F4BE0684B*D401 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Boom/section options 1
Maximum cut height | 8240 mm and 9390 mm |
Unit load-transfer height | 2990 mm and 3140 mm |
Unit load-transfer length | 6800 mm and 7925 mm |
Images
Sizes
5. Clearance | 440 mm | 5. Clearance | 340 mm |
4. Wheelbase | 2600 mm | 4. Wheelbase | 2550 mm |
7. Height to cab upper part | 3000 mm | 7. Height to cab upper part | 3140 mm |
2. Overall width | 2500 mm | 2. Overall width | 2530 mm |
Boom/section options 1
1. Unit load-transfer length | 6800 mm | 1. Unit load-transfer length | 7940 mm |
3. Unit load-transfer height | 2990 mm | 3. Unit load-transfer height | 3400 mm |
9. Maximum cut height | 8240 mm | 9. Maximum cut height | 9870 mm |
10. Maximum loading height | 6040 mm | 10. Maximum loading height | 6990 mm |
12. Maximum vertical wall digging depth | 3665 mm | 12. Maximum vertical wall digging depth | 5315 mm |
13. Maximum excavation depth | 4315 mm | 13. Maximum excavation depth | 6350 mm |