vs.

      Bolinder Munktell VHK100 vs. Caterpillar 16M

      3 reasons to buy Bolinder Munktell VHK100:

      Circle

      Maximum lifting above ground level 470 mm and 395 mm 16 % more or 75 mm
      Maximum radius outside left tyres 1800 mm and 2282 mm 21 % less or 482 mm
      Right maximum radius outside tyres 1800 mm and 2587 mm 30 % less or 787 mm

      15 reasons to buy Caterpillar 16M:

      Steerage

      Turn radius 8.9 m and 9.9 m 10 % less or 1.0 m

      Sizes

      Front part clearance 688 mm and 615 mm 11 % more or 73 mm

      Operation

      Front axle maximum operating weight 10919 kg and 4837.5 kg 56 % more or 6081.5 kg
      Rear axle maximum operating weight 24753 kg and 6412.5 kg 74 % more or 18340.5 kg
      Fuel Capacity 511 l. and 124.9 l. 76 % more or 386.1 l.
      Front axle standard operating weight 7112 kg and 2850 kg 60 % more or 4262 kg
      Rear axle standard operating weight 18948 kg and 6950 kg 63 % more or 11998 kg

      Motor

      Effective speeds output 7-8 232.7 kW and 74.6 kW 68 % more or 158.1 kW
      Maximum power 232.7 kW and 74.6 kW 68 % more or 158.1 kW
      Displacement 12.5 l. and 6.7 l. 46 % more or 5.8 l.

      Gear box

      Reverse gears number 6 and 2 67 % more or 4
      Maximum forward speed 53.9 km/h and 33.8 km/h 37 % more or 20.1 km/h
      Maximum reverse gear 42.6 km/h and 8 km/h 81 % more or 34.6 km/h

      Front Axle

      Clearance 688 mm and 615 mm 11 % more or 73 mm

      Dump

      Blade pulling at maximum weight 22297 kg and 4200 kg 81 % more or 18097 kg

      Neutral reasons:

      Sizes

      Height to cab upper part 2950 mm and 3703 mm
      Dimensional length 7520 mm and 9963 mm
      Between tyres width 2230 mm and 3095 mm
      Wheelbase 5500 mm and 6985 mm
      Blade base 2420 mm and 3069 mm
      Dual axis wheelbase 1450 mm and 1841 mm

      Operation

      Total maximum operating weight 11250 kg and 35672 kg
      Overall standard operating weight 9800 kg and 26060 kg
      Tyre size 13.00-24 12 layers and 18.00-25 12PR (G-2)

      Motor

      Manufacturer Volvo and Caterpillar
      Model D67A and C13 ACERT VHP

      Gear box

      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 23 degrees and 18.2 degrees

      Dump

      Mouldboard width 3050 mm and 4877 mm
      Mouldboard height 610 mm and 787 mm
      Left lateral displacement 840 mm and 740 mm
      Lateral right shift 840 mm and 1094 mm

      Circle

      Diameter 1486 mm and 1822 mm

      Images

      Sizes

      1. Dimensional length 7520 mm 1. Dimensional length 9963 mm
      2. Between tyres width 2230 mm 2. Between tyres width 3095 mm
      3. Height to cab upper part 2950 mm 3. Height to cab upper part 3703 mm
      4. Wheelbase 5500 mm 4. Wheelbase 6985 mm
      6. Front part clearance 615 mm 6. Front part clearance 688 mm
      7. Dual axis wheelbase 1450 mm 7. Dual axis wheelbase 1841 mm
      8. Blade base 2420 mm 8. Blade base 3069 mm