vs.

      Case 845 DHP vs. Mauldin MG622

      11 reasons to buy Case 845 DHP:

      Operation

      Front axle standard operating weight 3707 kg and 3036.8 kg 18 % more or 670.2 kg
      Rear axle standard operating weight 9828 kg and 7323.2 kg 25 % more or 2504.8 kg
      Fuel Capacity 340.7 l. and 151.4 l. 56 % more or 189.3 l.
      Hydraulic system fluid volume 180 l. and 94.6 l. 47 % more or 85.4 l.

      Motor

      Displacement 6.7 l. and 4 l. 40 % more or 2.7 l.
      Maximum power 119.3 kW and 99.2 kW 17 % more or 20.1 kW

      Gear box

      Forward gears number 8 and 2 75 % more or 6
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 42.9 km/h and 35.4 km/h 17 % more or 7.5 km/h

      Dump

      Maximum cutting depth 711.2 mm and 596.9 mm 16 % more or 114.3 mm

      Circle

      Maximum lifting above ground level 444.5 mm and 358.1 mm 19 % more or 86.4 mm

      2 reasons to buy Mauldin MG622:

      Steerage

      Turn radius 6.2 m and 7.2 m 14 % less or 1.0 m

      Gear box

      Maximum reverse gear 35.4 km/h and 28.5 km/h 19 % more or 6.9 km/h

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 24 degrees

      Sizes

      Height to cab upper part 3340 mm and 2947.4 mm
      Dimensional length 8534 mm and 8345.4 mm
      Between tyres width 2510 mm and 2532.9 mm
      Wheelbase 6219 mm and 5282.2 mm
      Blade base 2562 mm and 2362.2 mm
      Dual axis wheelbase 1594 mm and 1447.8 mm

      Operation

      Overall standard operating weight 13535 kg and 10360.1 kg
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 15.5-25
      Operating voltage 24 V and 12 V

      Motor

      Aspiration Turbocharging with charge air cooler and turbocharging and cooling at the outlet
      Manufacturer Cummins and Deutz
      Model QSB 6.7, III Level III certified and 2012

      Gear box

      Transmission type Powershift of the camshaft with direct drive with electronic shift control and inching pedal and hydrostatic

      Front Axle

      General fluctuations 19 degrees and 30 degrees
      Wheel tilt 17.5 degrees and 20 degrees

      Dump

      Lateral right shift 686 mm and 679.5 mm
      Mouldboard width 3658 mm and 3657.6 mm
      Mouldboard height 559 mm and 558.8 mm
      Left lateral displacement 533 mm and 793.8 mm

      Circle

      Diameter 1752.6 mm and 1371.6 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8345.4 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2532.9 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 2947.4 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5282.2 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1447.8 mm
      8. Blade base 2562 mm 8. Blade base 2362.2 mm