vs.

      Case 865 VHP vs. Fiat-Hitachi FG105A

      13 reasons to buy Case 865 VHP:

      Sizes

      Rear ground clearance 380 mm and 331 mm 13 % more or 49 mm

      Operation

      Fuel Capacity 340.7 l. and 299 l. 12 % more or 41.7 l.
      Cooling system fluid volume 40 l. and 27 l. 32 % more or 13 l.
      Hydraulic system fluid volume 190 l. and 94.6 l. 50 % more or 95.4 l.
      Generator current strength 80 amperes and 45 amperes 44 % more or 35 amperes

      Motor

      Maximum power 152.9 kW and 147 kW 4 % more or 5.9 kW
      Effective drives torque 7-8 881 Nm and 753 Nm 15 % more or 128 Nm

      Hydraulic system

      Pump flow rate 143.5 l/min and 163 l/min 12 % less or 19.5 l/min

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 42.9 km/h and 42 km/h 2 % more or 0.9 km/h
      Maximum reverse gear 28.5 km/h and 27.4 km/h 4 % more or 1.1 km/h

      Dump

      Maximum cutting depth 711.2 mm and 165 mm 77 % more or 546.2 mm

      9 reasons to buy Fiat-Hitachi FG105A:

      Steerage

      Turn radius 7.2 m and 7.3 m 1 % less or 0.1 m

      Sizes

      Front part clearance 635 mm and 622 mm 2 % more or 13 mm

      Operation

      Each tandem case fluid volume 30.3 l. and 28.7 l. 5 % more or 1.6 l.
      Oil system fluid volume 20.3 l. and 17.8 l. 12 % more or 2.5 l.
      Transmission fluid volume 25 l. and 23 l. 8 % more or 2 l.
      Rear differential/final drive fluid volume 42 l. and 12 l. 71 % more or 30 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Displacement 8.3 l. and 6.7 l. 19 % more or 1.6 l.

      Circle

      Maximum lifting above ground level 622 mm and 444.5 mm 29 % more or 177.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3340 mm and 3340 mm
      Dimensional length 8534 mm and 8521 mm
      Between tyres width 2510 mm and 2540 mm
      Wheelbase 6219 mm and 1538 mm
      Blade base 2562 mm and 2642 mm
      Dual axis wheelbase 1594 mm and 5969 mm

      Operation

      Circular gearbox fluid volume 2.8 l. and 2.8 l.
      Tyre size 14.0 x 24 12PR TL G2 Firestone and 13X24(10PR)
      Operating voltage 24 V and 24 V

      Motor

      Torque measured at 1500 rev / min and 1500 rev / min
      Cylinders number 6 and 6
      Manufacturer Cummins and Cummins
      Model QSB-6.7, III Level III certified and 6 CT8.3
      Aspiration turbocharging / air cooling and turbocharging

      Hydraulic system

      Type of pump Piston pump with locking in the middle position, with load sensing and fully oil-actuated, variable displacement piston pump
      Overflow valve pressure 0 kPa and 2857 kPa

      Gear box

      Transmission type direct drive, powershift, camshaft and powershift transmission

      Front Axle

      Wheel tilt 17.5 degrees and 17.5 degrees
      General fluctuations 19 degrees and 19 degrees

      Dump

      Mouldboard width 3962 mm and 2762 mm
      Mouldboard height 600 mm and 953 mm
      Left lateral displacement 533 mm and 533 mm
      Lateral right shift 686 mm and 685 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Diameter 1752 mm and 1753 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6219 mm 4. Wheelbase 1538 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 331 mm
      6. Front part clearance 622 mm 6. Front part clearance 635 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 5969 mm
      8. Blade base 2562 mm 8. Blade base 2642 mm