vs.

      Case 885 vs. Caterpillar 120M

      13 reasons to buy Case 885:

      Sizes

      Rear ground clearance 380 mm and 347 mm 9 % more or 33 mm
      Front part clearance 622 mm and 572 mm 8 % more or 50 mm

      Operation

      Front axle standard operating weight 5103 kg and 3735 kg 27 % more or 1368 kg
      Rear axle standard operating weight 12147 kg and 10358 kg 15 % more or 1789 kg
      Fuel Capacity 340.7 l. and 340 l. 0 % more or 0.7 l.
      Hydraulic system fluid volume 190 l. and 60 l. 68 % more or 130 l.

      Motor

      Effective speeds output 7-8 152.9 kW and 102.9 kW 33 % more or 50.0 kW
      Maximum power 152.9 kW and 102.9 kW 33 % more or 50.0 kW
      Displacement 6.7 l. and 6.6 l. 1 % more or 0.1 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 143.5 l/min and 151 l/min 5 % less or 7.5 l/min

      Front Axle

      Clearance 622 mm and 572 mm 8 % more or 50 mm

      Circle

      Maximum lifting above ground level 442.5 mm and 427 mm 4 % more or 15.5 mm

      8 reasons to buy Caterpillar 120M:

      Steerage

      Turn radius 7.5 m and 7289 m 100 % less or 7281.5 m

      Operation

      Rear differential/final drive fluid volume 50 l. and 12 l. 76 % more or 38 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 61 l. and 22.7 l. 63 % more or 38.3 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44.5 km/h and 43 km/h 3 % more or 1.5 km/h
      Maximum reverse gear 37.8 km/h and 30.6 km/h 19 % more or 7.2 km/h

      Dump

      Maximum cutting depth 720 mm and 711 mm 1 % more or 9 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Height to cab upper part 3340 mm and 3278 mm
      Dimensional length 8534 mm and 8488 mm
      Between tyres width 2650 mm and 2481 mm
      Wheelbase 6219 mm and 5915 mm
      Blade base 2562 mm and 2511 mm
      Dual axis wheelbase 1602 mm and 1511 mm

      Operation

      Overall standard operating weight 17250 kg and 14093 kg
      Cooling system fluid volume 40 l. and 40 l.

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Caterpillar
      Model QSB 6.7, III Level III certified and C6.6 ACERT VHP

      Hydraulic system

      Overflow valve pressure 42002.8 kPa and 24100 kPa
      Type of pump piston pump and variable displacement piston pump

      Gear box

      Transmission type powershift and direct drive, powershift, camshaft
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 17.5 degrees and 18 degrees
      General fluctuations 38 degrees and 32 degrees

      Dump

      Mouldboard width 4267 mm and 3668 mm
      Mouldboard height 600 mm and 610 mm
      Lateral right shift 686 mm and 660 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 533 mm and 510 mm

      Circle

      Diameter 1752 mm and 1530 mm

      Images

      Sizes

      1. Dimensional length 8534 mm 1. Dimensional length 8488 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2481 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3278 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5915 mm
      5. Rear ground clearance 380 mm 5. Rear ground clearance 347 mm
      6. Front part clearance 622 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1511 mm
      8. Blade base 2562 mm 8. Blade base 2511 mm