- Home/
- Comparison/
- Grader/
- Caterpillar 120H ES vs. Volvo G780 VHP
Caterpillar 120H ES vs. Volvo G780 VHP
5 reasons to buy Caterpillar 120H ES:
Hydraulic system
Pump flow rate | 148 l/min and 183 l/min | 19 % less or 35 l/min |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 42.6 km/h and 38.3 km/h | 10 % more or 4.3 km/h |
Maximum reverse gear | 33.7 km/h and 27.4 km/h | 19 % more or 6.3 km/h |
Circle
Maximum lifting above ground level | 457 mm and 431.8 mm | 6 % more or 25.2 mm |
6 reasons to buy Volvo G780 VHP:
Operation
Hydraulic system fluid volume | 90 l. and 68 l. | 24 % more or 22 l. |
Generator current strength | 75 amperes and 50 amperes | 33 % more or 25 amperes |
Fuel Capacity | 378.5 l. and 284 l. | 25 % more or 94.5 l. |
Motor
Effective speeds output 7-8 | 175.2 kW and 104.4 kW | 40 % more or 70.8 kW |
Maximum power | 175.2 kW and 104.4 kW | 40 % more or 70.8 kW |
Displacement | 10.8 l. and 6.6 l. | 39 % more or 4.2 l. |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Height to cab upper part | 3110 mm and 3200 mm |
Dimensional length | 8260 mm and 8687 mm |
Between tyres width | 2440 mm and 2794 mm |
Wheelbase | 5870 mm and 6248 mm |
Blade base | 2600 mm and 2718 mm |
Operation
Tyre size | 12-24 10PR (G-2) and 16.00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 12518 kg and 19388 kg |
Motor
Manufacturer | Caterpillar and Cummins |
Model | 3116 DITA and M11 |
Hydraulic system
Overflow valve pressure | 24131.6 kPa and 17236.9 kPa |
Type of pump | Axial-piston pump and hydraulic system with load sensing |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 32 degrees and 16 degrees |
Dump
Mouldboard height | 610 mm and 787.4 mm |
Mouldboard width | 3660 mm and 4267.2 mm |
Mouldboard thickness | 22 mm and 25.4 mm |
Images
Sizes
1. Dimensional length | 8260 mm | 1. Dimensional length | 8687 mm |
2. Between tyres width | 2440 mm | 2. Between tyres width | 2794 mm |
3. Height to cab upper part | 3110 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 5870 mm | 4. Wheelbase | 6248 mm |
8. Blade base | 2600 mm | 8. Blade base | 2718 mm |