- Home/
- Comparison/
- Grader/
- Caterpillar 120M vs. Mitsubishi MG330-E
Caterpillar 120M vs. Mitsubishi MG330-E
6 reasons to buy Caterpillar 120M:
Operation
Fuel Capacity | 340 l. and 230 l. | 32 % more or 110 l. |
Circular gearbox fluid volume | 7 l. and 3.5 l. | 50 % more or 3.5 l. |
Motor
Maximum power | 102.9 kW and 100.7 kW | 2 % more or 2.2 kW |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Maximum forward speed | 44.5 km/h and 42.6 km/h | 4 % more or 1.9 km/h |
Front Axle
Clearance | 572 mm and 555 mm | 3 % more or 17 mm |
7 reasons to buy Mitsubishi MG330-E:
Operation
Hydraulic system fluid volume | 67 l. and 60 l. | 10 % more or 7 l. |
Each tandem case fluid volume | 73 l. and 61 l. | 16 % more or 12 l. |
Motor
Displacement | 7.5 l. and 6.6 l. | 12 % more or 0.9 l. |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Hydraulic system
Pump flow rate | 120 l/min and 151 l/min | 21 % less or 31 l/min |
Gear box
Maximum reverse gear | 43.3 km/h and 37.8 km/h | 13 % more or 5.5 km/h |
Circle
Maximum lifting above ground level | 480 mm and 427 mm | 11 % more or 53 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 26 degrees |
Sizes
Height to cab upper part | 3278 mm and 3130 mm |
Dimensional length | 8488 mm and 7820 mm |
Between tyres width | 2481 mm and 2450 mm |
Wheelbase | 5915 mm and 5700 mm |
Blade base | 2511 mm and 2500 mm |
Operation
Overall standard operating weight | 14093 kg and 15600 kg |
Motor
Manufacturer | Caterpillar and Mitsubishi |
Model | C6.6 ACERT VHP and 6D16-TE1 |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | variable displacement piston pump and Pump with double gear |
Overflow valve pressure | 24100 kPa and 17.2 kPa |
Gear box
Reverse gears number | 6 and 6 |
Transmission type | direct drive, powershift, camshaft and planetary gear |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Mouldboard width | 3668 mm and 3710 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Circle
Blade tilt front angle | 40 degrees and 40 degrees |
Blade tilt rear angle | 5 degrees and 5 degrees |
Left shift | 656 mm and 1890 mm |
Right shift | 656 mm and 1900 mm |
Images
Sizes
1. Dimensional length | 8488 mm | 1. Dimensional length | 7820 mm |
2. Between tyres width | 2481 mm | 2. Between tyres width | 2450 mm |
3. Height to cab upper part | 3278 mm | 3. Height to cab upper part | 3130 mm |
4. Wheelbase | 5915 mm | 4. Wheelbase | 5700 mm |
8. Blade base | 2511 mm | 8. Blade base | 2500 mm |