vs.

      Caterpillar 120M vs. New Holland G200

      11 reasons to buy Caterpillar 120M:

      Steerage

      Turn radius 7.5 m and 7289 m 100 % less or 7281.5 m

      Operation

      Cooling system fluid volume 40 l. and 39.7 l. 1 % more or 0.3 l.
      Rear differential/final drive fluid volume 50 l. and 12.1 l. 76 % more or 37.9 l.
      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 61 l. and 22.7 l. 63 % more or 38.3 l.

      Hydraulic system

      Pump flow rate 151 l/min and 185.5 l/min 19 % less or 34.5 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44.5 km/h and 43 km/h 3 % more or 1.5 km/h
      Maximum reverse gear 37.8 km/h and 30.6 km/h 19 % more or 7.2 km/h

      Circle

      Maximum radius outside left tyres 1742 mm and 1978 mm 12 % less or 236 mm
      Right maximum radius outside tyres 1905 mm and 2174 mm 12 % less or 269 mm

      13 reasons to buy New Holland G200:

      Sizes

      Rear ground clearance 378 mm and 347 mm 8 % more or 31 mm
      Front part clearance 622 mm and 572 mm 8 % more or 50 mm

      Operation

      Hydraulic system fluid volume 179.8 l. and 60 l. 67 % more or 119.8 l.
      Front axle standard operating weight 5102.9 kg and 3735 kg 27 % more or 1367.9 kg
      Rear axle standard operating weight 12014.8 kg and 10358 kg 14 % more or 1656.8 kg
      Fuel Capacity 340.7 l. and 340 l. 0 % more or 0.7 l.

      Motor

      Effective speeds output 7-8 152.9 kW and 102.9 kW 33 % more or 50.0 kW
      Maximum power 152.9 kW and 102.9 kW 33 % more or 50.0 kW
      Displacement 6.7 l. and 6.6 l. 1 % more or 0.1 l.
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Front Axle

      Clearance 622 mm and 572 mm 8 % more or 50 mm

      Circle

      Maximum lifting above ground level 445 mm and 427 mm 4 % more or 18 mm
      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3278 mm and 3140 mm
      Dimensional length 8488 mm and 8555 mm
      Between tyres width 2481 mm and 2650 mm
      Wheelbase 5915 mm and 6219 mm
      Blade base 2511 mm and 2562 mm
      Dual axis wheelbase 1511 mm and 1602 mm

      Operation

      Overall standard operating weight 14093 kg and 17117.7 kg

      Motor

      Manufacturer Caterpillar and Cummins
      Model C6.6 ACERT VHP and QSB 6.7L
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24100 kPa and 17926.4 kPa

      Gear box

      Forward gears number 8 and 8
      Transmission type direct drive, powershift, camshaft and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 32 degrees and 19 degrees

      Dump

      Left lateral displacement 510 mm and 533 mm
      Lateral right shift 660 mm and 711 mm
      Lowered blade pressure 13103 kg and 8795.6 kg
      Mouldboard width 3668 mm and 4267.2 mm
      Mouldboard height 610 mm and 622 mm
      Mouldboard thickness 22 mm and 22 mm

      Circle

      Diameter 1530 mm and 1753 mm
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8488 mm 1. Dimensional length 8555 mm
      2. Between tyres width 2481 mm 2. Between tyres width 2650 mm
      3. Height to cab upper part 3278 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 5915 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 347 mm 5. Rear ground clearance 378 mm
      6. Front part clearance 572 mm 6. Front part clearance 622 mm
      7. Dual axis wheelbase 1511 mm 7. Dual axis wheelbase 1602 mm
      8. Blade base 2511 mm 8. Blade base 2562 mm