- Home/
- Comparison/
- Grader/
- Caterpillar 12G vs. Mitsubishi MG130-E
Caterpillar 12G vs. Mitsubishi MG130-E
14 reasons to buy Caterpillar 12G:
Operation
Fuel Capacity | 283 l. and 115 l. | 59 % more or 168 l. |
Oil system fluid volume | 29 l. and 12 l. | 59 % more or 17 l. |
Hydraulic system fluid volume | 76 l. and 67 l. | 12 % more or 9 l. |
Transmission fluid volume | 87 l. and 23 l. | 74 % more or 64 l. |
Each tandem case fluid volume | 64 l. and 26 l. | 59 % more or 38 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Maximum power | 100.7 kW and 70.8 kW | 30 % more or 29.9 kW |
Displacement | 10.5 l. and 4.2 l. | 60 % more or 6.3 l. |
Gear box
Maximum forward speed | 41 km/h and 32.6 km/h | 20 % more or 8.4 km/h |
Maximum reverse gear | 41 km/h and 33.2 km/h | 19 % more or 7.8 km/h |
Front Axle
Clearance | 610 mm and 480 mm | 21 % more or 130 mm |
Circle
Maximum lifting above ground level | 438 mm and 400 mm | 9 % more or 38 mm |
Blade tilt front angle | 90 degrees and 40 degrees | 56 % more or 50 degrees |
Blade tilt rear angle | 90 degrees and 5 degrees | 94 % more or 85 degrees |
3 reasons to buy Mitsubishi MG130-E:
Operation
Generator current strength | 30 amperes and 19 amperes | 37 % more or 11 amperes |
Motor
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Hydraulic system
Pump flow rate | 106 l/min and 193 l/min | 45 % less or 87 l/min |
Neutral reasons:
Steerage
Left and right hinge connection | 50 degrees and 26 degrees |
Sizes
Wheelbase | 5920 mm and 4900 mm |
Blade base | 2570 mm and 2135 mm |
Height to cab upper part | 3330 mm and 3010 mm |
Dimensional length | 8310 mm and 6910 mm |
Between tyres width | 2410 mm and 2140 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 12700 kg and 10060 kg |
Motor
Manufacturer | Caterpillar and Mitsubishi |
Hydraulic system
Type of pump | Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Pump with double gear |
Overflow valve pressure | 14823.7 kPa and 17.2 kPa |
Gear box
Transmission type | Powershift transmission with direct drive and planetary gear |
Forward gears number | 6 and 6 |
Reverse gears number | 6 and 6 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 19 mm |
Mouldboard width | 3650 mm and 3100 mm |
Circle
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8310 mm | 1. Dimensional length | 6910 mm |
2. Between tyres width | 2410 mm | 2. Between tyres width | 2140 mm |
3. Height to cab upper part | 3330 mm | 3. Height to cab upper part | 3010 mm |
4. Wheelbase | 5920 mm | 4. Wheelbase | 4900 mm |
8. Blade base | 2570 mm | 8. Blade base | 2135 mm |