vs.

      Caterpillar 135H vs. Terex TG190

      12 reasons to buy Caterpillar 135H:

      Steerage

      Turn radius 7.3 m and 7.5 m 3 % less or 0.2 m

      Operation

      Each tandem case fluid volume 48.1 l. and 42 l. 13 % more or 6.1 l.
      Circular gearbox fluid volume 6.8 l. and 6 l. 12 % more or 0.8 l.

      Motor

      Displacement 7.2 l. and 6 l. 17 % more or 1.2 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 6 and 3 50 % more or 3
      Maximum forward speed 42 km/h and 40 km/h 5 % more or 2 km/h
      Maximum reverse gear 33.2 km/h and 19.4 km/h 42 % more or 13.8 km/h

      Front Axle

      Clearance 608 mm and 591 mm 3 % more or 17 mm

      Dump

      Blade pulling at maximum weight 11505 kg and 9835.2 kg 15 % more or 1669.8 kg

      Circle

      Right maximum radius outside tyres 1912 mm and 3180 mm 40 % less or 1268 mm
      Maximum radius outside left tyres 1840 mm and 2220 mm 17 % less or 380 mm

      12 reasons to buy Terex TG190:

      Sizes

      Rear ground clearance 474 mm and 351 mm 26 % more or 123 mm
      Front part clearance 591 mm and 351 mm 41 % more or 240 mm

      Operation

      Generator current strength 55 amperes and 35 amperes 36 % more or 20 amperes
      Front axle standard operating weight 5000 kg and 3738.5 kg 25 % more or 1261.5 kg
      Rear axle standard operating weight 13700 kg and 9343.1 kg 32 % more or 4356.9 kg
      Fuel Capacity 480 l. and 340.7 l. 29 % more or 139.3 l.
      Cooling system fluid volume 42 l. and 39.4 l. 6 % more or 2.6 l.
      Hydraulic system fluid volume 170 l. and 67 l. 61 % more or 103 l.

      Motor

      Maximum power 138 kW and 115.6 kW 16 % more or 22.4 kW
      Effective speeds output 5-6 138 kW and 115.6 kW 16 % more or 22.4 kW

      Hydraulic system

      Pump flow rate 99 l/min and 144 l/min 31 % less or 45 l/min

      Circle

      Maximum lifting above ground level 470 mm and 457 mm 3 % more or 13 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 45 degrees

      Sizes

      Between tyres width 2402 mm and 2490 mm
      Wheelbase 5923 mm and 6136 mm
      Blade base 2596 mm and 2638 mm
      Dual axis wheelbase 1510 mm and 1542 mm
      Height to cab upper part 3332 mm and 3300 mm
      Dimensional length 10064 mm and 10266 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 13081.6 kg and 18700 kg

      Motor

      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6
      Manufacturer Caterpillar and Cummins

      Hydraulic system

      Type of pump variable displacement piston pump and axial piston pump
      Overflow valve pressure 24131.6 kPa and 18400 kPa

      Gear box

      Transmission type direct drive, powershift and powershift transmission with torque converter

      Front Axle

      Wheel tilt 18 degrees and 17 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Mouldboard width 3658 mm and 3660 mm
      Mouldboard height 610 mm and 630 mm
      Mouldboard thickness 22 mm and 20 mm
      Left lateral displacement 524 mm and 1250 mm
      Lateral right shift 660 mm and 1250 mm

      Images

      Sizes

      7. Dual axis wheelbase 1510 mm 7. Dual axis wheelbase 1542 mm
      8. Blade base 2596 mm 8. Blade base 2638 mm
      1. Dimensional length 10064 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2402 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3332 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 5923 mm 4. Wheelbase 6136 mm
      5. Rear ground clearance 351 mm 5. Rear ground clearance 474 mm
      6. Front part clearance 351 mm 6. Front part clearance 591 mm