vs.

      Caterpillar 140M2 AWD vs. Caterpillar 160H

      15 reasons to buy Caterpillar 140M2 AWD:

      Operation

      Rear axle maximum operating weight 16530.7 kg and 14970 kg 9 % more or 1560.7 kg
      Fuel Capacity 416 l. and 397 l. 5 % more or 19 l.
      Cooling system fluid volume 56 l. and 38 l. 32 % more or 18 l.
      Rear axle standard operating weight 13710.7 kg and 11691 kg 15 % more or 2019.7 kg
      Hydraulic system fluid volume 100 l. and 80 l. 20 % more or 20 l.

      Motor

      Effective speeds output 7-8 181.2 kW and 149.1 kW 18 % more or 32.1 kW
      Effective drives torque 7-8 1247.4 Nm and 1140 Nm 9 % more or 107.4 Nm
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 2100 rev / min and 1000 rev / min 52 % more or 1100 rev

      Hydraulic system

      Pump flow rate 210.8 l/min and 260 l/min 19 % less or 49.2 l/min

      Gear box

      Maximum forward speed 46.6 km/h and 43.6 km/h 6 % more or 3.0 km/h
      Maximum reverse gear 36.8 km/h and 34.4 km/h 7 % more or 2.4 km/h

      Circle

      Maximum radius outside left tyres 1790 mm and 2223 mm 19 % less or 433 mm
      Right maximum radius outside tyres 1978 mm and 2261 mm 13 % less or 283 mm
      Maximum lifting above ground level 480 mm and 452 mm 6 % more or 28 mm

      6 reasons to buy Caterpillar 160H:

      Steerage

      Turn radius 7.4 m and 7.8 m 5 % less or 0.4 m

      Operation

      Front axle maximum operating weight 8311 kg and 6052.3 kg 27 % more or 2258.7 kg
      Front axle standard operating weight 4589 kg and 4392.6 kg 4 % more or 196.4 kg

      Motor

      Displacement 10.3 l. and 9.3 l. 10 % more or 1.0 l.

      Dump

      Maximum cutting depth 770 mm and 715 mm 7 % more or 55 mm
      Blade pulling at maximum weight 20071 kg and 9091.8 kg 55 % more or 10979.2 kg

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 20 degrees

      Sizes

      Between tyres width 2581 mm and 2460 mm
      Wheelbase 6126 mm and 6169 mm
      Dual axis wheelbase 1523 mm and 1523 mm
      Height to cab upper part 3287 mm and 3356 mm
      Dimensional length 8898 mm and 10097 mm

      Operation

      Total maximum operating weight 22583 kg and 23281 kg
      Overall standard operating weight 18103.3 kg and 16280 kg
      Circular gearbox fluid volume 7 l. and 7 l.
      Each tandem case fluid volume 64 l. and 64 l.

      Motor

      Manufacturer Caterpillar and Caterpillar
      Model C9.3 ACERT VHP and 3176C ATAAC

      Hydraulic system

      Type of pump variable displacement piston pump and Axial-piston pump
      Overflow valve pressure 24131.6 kPa and 24150 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 6 and 6

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard height 609.6 mm and 686 mm
      Mouldboard thickness 22 mm and 25 mm
      Left lateral displacement 510 mm and 851 mm
      Lateral right shift 660 mm and 943 mm
      Lowered blade pressure 10380 kg and 13808 kg
      Mouldboard width 3657.6 mm and 4267 mm

      Circle

      Left shift 695 mm and 848 mm
      Right shift 728 mm and 881 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 8898 mm 1. Dimensional length 10097 mm
      2. Between tyres width 2581 mm 2. Between tyres width 2460 mm
      3. Height to cab upper part 3287 mm 3. Height to cab upper part 3356 mm
      4. Wheelbase 6126 mm 4. Wheelbase 6169 mm
      7. Dual axis wheelbase 1523 mm 7. Dual axis wheelbase 1523 mm