vs.

      Caterpillar 14H vs. John Deere JD570

      18 reasons to buy Caterpillar 14H:

      Sizes

      Front part clearance 645 mm and 597.4 mm 7 % more or 47.6 mm

      Operation

      Each tandem case fluid volume 98 l. and 18.9 l. 81 % more or 79.1 l.
      Front axle standard operating weight 5305 kg and 2494.8 kg 53 % more or 2810.2 kg
      Rear axle standard operating weight 13504 kg and 5715.3 kg 58 % more or 7788.7 kg
      Front axle maximum operating weight 8811 kg and 2630.8 kg 70 % more or 6180.2 kg
      Rear axle maximum operating weight 17729 kg and 6168.9 kg 65 % more or 11560.1 kg
      Fuel Capacity 416 l. and 189.3 l. 54 % more or 226.7 l.
      Cooling system fluid volume 48.3 l. and 20.8 l. 57 % more or 27.5 l.
      Hydraulic system fluid volume 125 l. and 79.5 l. 36 % more or 45.5 l.
      Circular gearbox fluid volume 6 l. and 5.7 l. 5 % more or 0.3 l.

      Motor

      Effective speeds output 7-8 179 kW and 61.9 kW 65 % more or 117.1 kW
      Maximum power 179 kW and 61.9 kW 65 % more or 117.1 kW
      Displacement 10.3 l. and 5 l. 51 % more or 5.3 l.

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum forward speed 42.7 km/h and 34.4 km/h 19 % more or 8.3 km/h
      Maximum reverse gear 47.3 km/h and 10.9 km/h 77 % more or 36.4 km/h

      Front Axle

      Clearance 645 mm and 597.4 mm 7 % more or 47.6 mm

      Circle

      Maximum lifting above ground level 419 mm and 311.2 mm 26 % more or 107.8 mm

      3 reasons to buy John Deere JD570:

      Steerage

      Turn radius 5.5 m and 7.9 m 30 % less or 2.4 m

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 101.8 l/min and 243 l/min 58 % less or 141.2 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 22 degrees

      Sizes

      Height to cab upper part 3339 mm and 3200.4 mm
      Dimensional length 9342 mm and 7415.8 mm
      Between tyres width 2817 mm and 2386.6 mm
      Wheelbase 6460 mm and 5282.2 mm
      Blade base 2860 mm and 2337.8 mm
      Dual axis wheelbase 1656 mm and 1447.8 mm

      Operation

      Overall standard operating weight 18809 kg and 9197.9 kg
      Total maximum operating weight 26540 kg and 8210 kg

      Motor

      Manufacturer Caterpillar and John Deere

      Hydraulic system

      Type of pump axial piston and piston pump
      Overflow valve pressure 24150 kPa and 13789.5 kPa

      Gear box

      Transmission type direct drive, powershift, of planetary type and powershift
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard thickness 25 mm and 15.7 mm
      Left lateral displacement 650 mm and 679.5 mm
      Lateral right shift 790 mm and 793.8 mm
      Mouldboard width 4267 mm and 3657.6 mm
      Mouldboard height 686 mm and 609.6 mm

      Circle

      Diameter 1822 mm and 1371.6 mm

      Images

      Sizes

      3. Height to cab upper part 3339 mm 3. Height to cab upper part 3200.4 mm
      4. Wheelbase 6460 mm 4. Wheelbase 5282.2 mm
      6. Front part clearance 645 mm 6. Front part clearance 597.4 mm
      7. Dual axis wheelbase 1656 mm 7. Dual axis wheelbase 1447.8 mm
      8. Blade base 2860 mm 8. Blade base 2337.8 mm
      1. Dimensional length 9342 mm 1. Dimensional length 7415.8 mm
      2. Between tyres width 2817 mm 2. Between tyres width 2386.6 mm