vs.

      Caterpillar 14M vs. John Deere 670D

      18 reasons to buy Caterpillar 14M:

      Operation

      Rear axle standard operating weight 15659 kg and 10663 kg 32 % more or 4996 kg
      Cooling system fluid volume 46.5 l. and 45.4 l. 2 % more or 1.1 l.
      Hydraulic system fluid volume 60 l. and 53 l. 12 % more or 7 l.
      Front axle maximum operating weight 9939 kg and 4413 kg 56 % more or 5526 kg
      Transmission fluid volume 89 l. and 22.7 l. 74 % more or 66.3 l.
      Rear axle maximum operating weight 19997 kg and 12728 kg 36 % more or 7269 kg
      Fuel Capacity 492 l. and 401.2 l. 18 % more or 90.8 l.
      Circular gearbox fluid volume 6 l. and 5.7 l. 5 % more or 0.3 l.
      Front axle standard operating weight 5720 kg and 3855 kg 33 % more or 1865 kg
      Each tandem case fluid volume 96.5 l. and 75.7 l. 22 % more or 20.8 l.

      Motor

      Effective speeds output 7-8 204.3 kW and 138 kW 32 % more or 66.3 kW
      Maximum power 204.3 kW and 138 kW 32 % more or 66.3 kW
      Effective speeds output 1-2 193 kW and 108 kW 44 % more or 85 kW
      Displacement 11.1 l. and 6.8 l. 39 % more or 4.3 l.
      Effective speeds output 3-4 204 kW and 123 kW 40 % more or 81 kW
      Effective speeds output 5-6 204 kW and 123 kW 40 % more or 81 kW

      Gear box

      Maximum forward speed 49.8 km/h and 40 km/h 20 % more or 9.8 km/h

      Dump

      Blade pulling at maximum weight 17997 kg and 12800 kg 29 % more or 5197 kg

      9 reasons to buy John Deere 670D:

      Steerage

      Turn radius 7 m and 7.9 m 11 % less or 0.9 m

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Pump flow rate 207 l/min and 280 l/min 26 % less or 73 l/min

      Gear box

      Reverse gears number 8 and 6 25 % more or 2
      Maximum reverse gear 40 km/h and 39.4 km/h 1 % more or 0.6 km/h

      Circle

      Blade tilt front angle 42 degrees and 40 degrees 5 % more or 2 degrees
      Maximum radius outside left tyres 2100 mm and 2169 mm 3 % less or 69 mm
      Right maximum radius outside tyres 2080 mm and 2279 mm 9 % less or 199 mm
      Maximum lifting above ground level 470 mm and 419 mm 11 % more or 51 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 22 degrees

      Sizes

      Wheelbase 6559 mm and 6120 mm
      Blade base 2842 mm and 2568 mm
      Height to cab upper part 3535 mm and 3180 mm
      Dual axis wheelbase 1656 mm and 1540 mm
      Dimensional length 9412 mm and 8804 mm
      Between tyres width 2791 mm and 2510 mm

      Operation

      Overall standard operating weight 21379 kg and 14519 kg
      Total maximum operating weight 29936 kg and 17141 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and John Deere
      Model C11 ACERT VHP and 6068H

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement piston pump
      Overflow valve pressure 24150 kPa and 18960.6 kPa

      Gear box

      Transmission type direct drive, powershift, camshaft and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 17.1 degrees and 20 degrees
      General fluctuations 32 degrees and 32 degrees

      Dump

      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 740 mm and 680 mm
      Lateral right shift 790 mm and 680 mm
      Mouldboard width 4267 mm and 3660 mm
      Mouldboard height 688 mm and 610 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1822 mm and 1524 mm
      Left shift 650 mm and 787 mm
      Right shift 520 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 9412 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2791 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3535 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6559 mm 4. Wheelbase 6120 mm
      7. Dual axis wheelbase 1656 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2842 mm 8. Blade base 2568 mm