- Home/
- Comparison/
- Grader/
- Caterpillar 160H vs. John Deere JD570
Caterpillar 160H vs. John Deere JD570
17 reasons to buy Caterpillar 160H:
Operation
Cooling system fluid volume | 38 l. and 20.8 l. | 45 % more or 17.2 l. |
Hydraulic system fluid volume | 80 l. and 79.5 l. | 1 % more or 0.5 l. |
Circular gearbox fluid volume | 7 l. and 5.7 l. | 19 % more or 1.3 l. |
Each tandem case fluid volume | 64 l. and 18.9 l. | 70 % more or 45.1 l. |
Front axle standard operating weight | 4589 kg and 2494.8 kg | 46 % more or 2094.2 kg |
Rear axle standard operating weight | 11691 kg and 5715.3 kg | 51 % more or 5975.7 kg |
Front axle maximum operating weight | 8311 kg and 2630.8 kg | 68 % more or 5680.2 kg |
Rear axle maximum operating weight | 14970 kg and 6168.9 kg | 59 % more or 8801.1 kg |
Fuel Capacity | 397 l. and 189.3 l. | 52 % more or 207.7 l. |
Motor
Maximum power | 149.1 kW and 61.9 kW | 58 % more or 87.2 kW |
Effective drives torque 7-8 | 1140 Nm and 287.4 Nm | 75 % more or 852.6 Nm |
Effective speeds output 7-8 | 149.1 kW and 61.9 kW | 58 % more or 87.2 kW |
Displacement | 10.3 l. and 5 l. | 51 % more or 5.3 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum reverse gear | 34.4 km/h and 10.9 km/h | 68 % more or 23.5 km/h |
Maximum forward speed | 43.6 km/h and 34.4 km/h | 21 % more or 9.2 km/h |
Circle
Maximum lifting above ground level | 452 mm and 311.2 mm | 31 % more or 140.8 mm |
4 reasons to buy John Deere JD570:
Steerage
Turn radius | 5.5 m and 7.4 m | 26 % less or 1.9 m |
Motor
Power measured at | 2300 rev / min and 2000 rev / min | 13 % more or 300 rev |
Torque measured at | 1300 rev / min and 1000 rev / min | 23 % more or 300 rev |
Hydraulic system
Pump flow rate | 101.8 l/min and 260 l/min | 61 % less or 158.2 l/min |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Height to cab upper part | 3356 mm and 3200.4 mm |
Dimensional length | 10097 mm and 7415.8 mm |
Between tyres width | 2460 mm and 2386.6 mm |
Wheelbase | 6169 mm and 5282.2 mm |
Dual axis wheelbase | 1523 mm and 1447.8 mm |
Operation
Tyre size | 10-24 12PR and 13.00-24 |
Operating voltage | 24 V and 12 V |
Overall standard operating weight | 16280 kg and 9197.9 kg |
Total maximum operating weight | 23281 kg and 8210 kg |
Motor
Manufacturer | Caterpillar and John Deere |
Hydraulic system
Type of pump | Axial-piston pump and piston pump |
Overflow valve pressure | 24150 kPa and 13789.5 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Mouldboard thickness | 25 mm and 15.7 mm |
Left lateral displacement | 851 mm and 679.5 mm |
Lateral right shift | 943 mm and 793.8 mm |
Mouldboard width | 4267 mm and 3657.6 mm |
Mouldboard height | 686 mm and 609.6 mm |
Images
Sizes
1. Dimensional length | 10097 mm | 1. Dimensional length | 7415.8 mm |
2. Between tyres width | 2460 mm | 2. Between tyres width | 2386.6 mm |
3. Height to cab upper part | 3356 mm | 3. Height to cab upper part | 3200.4 mm |
4. Wheelbase | 6169 mm | 4. Wheelbase | 5282.2 mm |
7. Dual axis wheelbase | 1523 mm | 7. Dual axis wheelbase | 1447.8 mm |