- Home/
- Comparison/
- Grader/
- Caterpillar 160M2 vs. Volvo G710 VHP
Caterpillar 160M2 vs. Volvo G710 VHP
7 reasons to buy Caterpillar 160M2:
Operation
Rear axle standard operating weight | 13059.8 kg and 9630 kg | 26 % more or 3429.8 kg |
Motor
Torque measured at | 2100 rev / min and 1600 rev / min | 24 % more or 500 rev |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 46.7 km/h and 39.8 km/h | 15 % more or 6.9 km/h |
Maximum reverse gear | 36.9 km/h and 28.5 km/h | 23 % more or 8.4 km/h |
Front Axle
Clearance | 600 mm and 597 mm | 0 % more or 3 mm |
Dump
Blade pulling at maximum weight | 9091.8 kg and 8667.7 kg | 5 % more or 424.1 kg |
5 reasons to buy Volvo G710 VHP:
Steerage
Turn radius | 7.7 m and 7.8 m | 1 % less or 0.1 m |
Operation
Front axle standard operating weight | 4264 kg and 4236.1 kg | 1 % more or 27.9 kg |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Hydraulic system
Pump flow rate | 191 l/min and 210.1 l/min | 9 % less or 19.1 l/min |
Dump
Maximum cutting depth | 826 mm and 750 mm | 9 % more or 76 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Between tyres width | 2581 mm and 2489 mm |
Wheelbase | 6126 mm and 6096 mm |
Blade base | 2557 mm and 2616 mm |
Dimensional length | 8898 mm and 8458 mm |
Operation
Overall standard operating weight | 17295.9 kg and 13894 kg |
Motor
Manufacturer | Caterpillar and Cummins |
Cylinders number | 6 and 6 |
Model | C9.3 ACERT VHP and 6B5.9 |
Hydraulic system
Overflow valve pressure | 24152.3 kPa and 17236.9 kPa |
Type of pump | variable displacement piston pump and hydraulic system with load sensing |
Gear box
Forward gears number | 8 and 8 |
Transmission type | Powershift transmission with direct drive and Volvo 8400 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 32 degrees and 16 degrees |
Dump
Lowered blade pressure | 10380 kg and 7481.6 kg |
Mouldboard width | 4267.2 mm and 3658 mm |
Mouldboard height | 609.6 mm and 635 mm |
Mouldboard thickness | 22 mm and 22.2 mm |
Left lateral displacement | 510 mm and 774.7 mm |
Lateral right shift | 660 mm and 774.7 mm |
Circle
Diameter | 1530 mm and 1683 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
1. Dimensional length | 8898 mm | 1. Dimensional length | 8458 mm |
2. Between tyres width | 2581 mm | 2. Between tyres width | 2489 mm |
4. Wheelbase | 6126 mm | 4. Wheelbase | 6096 mm |
8. Blade base | 2557 mm | 8. Blade base | 2616 mm |