vs.

      Caterpillar 16H vs. New Holland F170

      14 reasons to buy Caterpillar 16H:

      Operation

      Fuel Capacity 492 l. and 340 l. 31 % more or 152 l.
      Circular gearbox fluid volume 8 l. and 2.8 l. 65 % more or 5.2 l.
      Cooling system fluid volume 46.5 l. and 40 l. 14 % more or 6.5 l.
      Each tandem case fluid volume 121 l. and 29 l. 76 % more or 92 l.
      Hydraulic system fluid volume 129 l. and 95 l. 26 % more or 34 l.
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes
      Front axle maximum operating weight 8846 kg and 4250 kg 52 % more or 4596 kg
      Rear axle maximum operating weight 22746 kg and 10300 kg 55 % more or 12446 kg

      Motor

      Effective drives torque 7-8 1550 Nm and 230.5 Nm 85 % more or 1319.5 Nm
      Displacement 11.9 l. and 8.3 l. 30 % more or 3.6 l.

      Gear box

      Maximum forward speed 48.1 km/h and 43 km/h 11 % more or 5.1 km/h
      Maximum reverse gear 45.7 km/h and 28.5 km/h 38 % more or 17.2 km/h
      Reverse gears number 8 and 4 50 % more or 4

      Front Axle

      Clearance 732 mm and 622 mm 15 % more or 110 mm

      8 reasons to buy New Holland F170:

      Steerage

      Turn radius 7.3 m and 8.2 m 11 % less or 0.9 m

      Sizes

      Rear ground clearance 610 mm and 409 mm 33 % more or 201 mm

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 183 l/min and 254 l/min 28 % less or 71 l/min

      Dump

      Maximum cutting depth 712 mm and 470 mm 34 % more or 242 mm

      Circle

      Maximum radius outside left tyres 1735 mm and 2311 mm 25 % less or 576 mm
      Right maximum radius outside tyres 1895 mm and 2311 mm 18 % less or 416 mm
      Maximum lifting above ground level 444 mm and 419 mm 6 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 20 degrees and 25 degrees

      Sizes

      Height to cab upper part 3524 mm and 3340 mm
      Dimensional length 9994 mm and 8521 mm
      Between tyres width 3077 mm and 2510 mm
      Wheelbase 6960 mm and 6219 mm
      Blade base 3071 mm and 2562 mm
      Dual axis wheelbase 1841 mm and 1594 mm

      Operation

      Operating voltage 24 V and 24 V
      Total maximum operating weight 31592 kg and 14550 kg

      Motor

      Model 3196 ETA and 6 CTAA 8.3 2 level
      Manufacturer Caterpillar and Cummins
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump axial piston and full hydraulic system with load sensing
      Overflow valve pressure 24150 kPa and 17900 kPa

      Gear box

      Transmission type direct drive, powershift, of planetary type and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 32 degrees and 19 degrees
      Wheel tilt 18 degrees and 18 degrees

      Dump

      Lowered blade pressure 15831 kg and 9356 kg
      Mouldboard width 4877 mm and 3962 mm
      Mouldboard height 787 mm and 671 mm
      Mouldboard thickness 25 mm and 22 mm
      Left lateral displacement 650 mm and 533 mm
      Lateral right shift 790 mm and 686 mm

      Circle

      Diameter 1822 mm and 1753 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      3. Height to cab upper part 3524 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6960 mm 4. Wheelbase 6219 mm
      5. Rear ground clearance 409 mm 5. Rear ground clearance 610 mm
      7. Dual axis wheelbase 1841 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 3071 mm 8. Blade base 2562 mm
      1. Dimensional length 9994 mm 1. Dimensional length 8521 mm
      2. Between tyres width 3077 mm 2. Between tyres width 2510 mm