vs.

      Caterpillar 24M vs. Mitsubishi MG330-E

      9 reasons to buy Caterpillar 24M:

      Operation

      Fuel Capacity 1326 l. and 230 l. 83 % more or 1096 l.
      Hydraulic system fluid volume 264 l. and 67 l. 75 % more or 197 l.
      Circular gearbox fluid volume 8.5 l. and 3.5 l. 59 % more or 5.0 l.
      Each tandem case fluid volume 322 l. and 73 l. 77 % more or 249 l.

      Motor

      Maximum power 397.5 kW and 100.7 kW 75 % more or 296.8 kW
      Displacement 18.1 l. and 7.5 l. 59 % more or 10.6 l.

      Gear box

      Maximum forward speed 43 km/h and 42.6 km/h 1 % more or 0.4 km/h

      Front Axle

      Clearance 858 mm and 555 mm 35 % more or 303 mm

      Circle

      Maximum lifting above ground level 634 mm and 480 mm 24 % more or 154 mm

      4 reasons to buy Mitsubishi MG330-E:

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump flow rate 120 l/min and 550 l/min 78 % less or 430 l/min

      Gear box

      Maximum reverse gear 43.3 km/h and 41.2 km/h 5 % more or 2.1 km/h
      Reverse gears number 6 and 3 50 % more or 3

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 26 degrees

      Sizes

      Height to cab upper part 4352 mm and 3130 mm
      Dimensional length 14194 mm and 7820 mm
      Between tyres width 4280 mm and 2450 mm
      Wheelbase 10278 mm and 5700 mm
      Blade base 4048 mm and 2500 mm

      Operation

      Overall standard operating weight 62456 kg and 15600 kg
      Tyre size 29.5-29 28PR and 14.00-24-12

      Motor

      Manufacturer Caterpillar and Mitsubishi
      Model C18 ACERT and 6D16-TE1
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Pump with double gear
      Overflow valve pressure 24150 kPa and 17.2 kPa

      Gear box

      Transmission type automatic, electronically controlled gear shifting under load and planetary gear
      Forward gears number 6 and 6

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 7315 mm and 3710 mm
      Mouldboard height 1067 mm and 610 mm
      Mouldboard thickness 50 mm and 22 mm

      Circle

      Blade tilt front angle 40 degrees and 40 degrees
      Left shift 804 mm and 1890 mm
      Right shift 437 mm and 1900 mm

      Images

      Sizes

      1. Dimensional length 14194 mm 1. Dimensional length 7820 mm
      2. Between tyres width 4280 mm 2. Between tyres width 2450 mm
      3. Height to cab upper part 4352 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 10278 mm 4. Wheelbase 5700 mm
      8. Blade base 4048 mm 8. Blade base 2500 mm