vs.

      Dressta RD200C vs. Volvo G990

      4 reasons to buy Dressta RD200C:

      Steerage

      Turn radius 7500 m and 8150 m 8 % less or 650 m

      Operation

      Hydraulic system fluid volume 130 l. and 91 l. 30 % more or 39 l.

      Motor

      Power measured at 2400 rev / min and 1700 rev / min 29 % more or 700 rev

      Hydraulic system

      Pump flow rate 80 l/min and 208 l/min 62 % less or 128 l/min

      14 reasons to buy Volvo G990:

      Operation

      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Fuel Capacity 498 l. and 380 l. 24 % more or 118 l.
      Cooling system fluid volume 47 l. and 40 l. 15 % more or 7 l.
      Transmission fluid volume 61 l. and 35 l. 43 % more or 26 l.
      Each tandem case fluid volume 105 l. and 30 l. 71 % more or 75 l.

      Motor

      Torque measured at 1550 rev / min and 1500 rev / min 3 % more or 50 rev
      Maximum power 206.6 kW and 132.7 kW 36 % more or 73.9 kW
      Displacement 9.4 l. and 6.7 l. 29 % more or 2.7 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 44.9 km/h and 44.7 km/h 0 % more or 0.2 km/h
      Maximum reverse gear 31.6 km/h and 31.4 km/h 1 % more or 0.2 km/h

      Front Axle

      Clearance 615 mm and 550 mm 11 % more or 65 mm

      Dump

      Maximum cutting depth 825 mm and 350 mm 58 % more or 475 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 21 degrees

      Sizes

      Height to cab upper part 3300 mm and 3280 mm
      Dimensional length 9540 mm and 9730 mm
      Between tyres width 2500 mm and 2800 mm
      Wheelbase 7300 mm and 6681 mm
      Blade base 3050 mm and 2935 mm

      Operation

      Tyre size 14.00 - 24 G-2 16PR and 16:00 x 24, G-2
      Overall standard operating weight 36376 kg and 22100 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Volvo
      Model QSB 6.7 and D9B
      Cylinders number 6 and 6
      Aspiration turbocharging and CAC and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Overflow valve pressure 14000 kPa and 20684.3 kPa
      Type of pump axial piston pump and axial piston pump

      Gear box

      Transmission type powershift transmission and HTE 840, Sequential direct drive gearbox with shifting under load Volvo

      Front Axle

      Wheel tilt 22 degrees and 18 degrees
      General fluctuations 40 degrees and 16 degrees

      Dump

      Mouldboard thickness 22 mm and 25 mm
      Mouldboard width 3660 mm and 4267.2 mm
      Mouldboard height 670 mm and 787 mm
      Left lateral displacement 800 mm and 673 mm
      Lateral right shift 800 mm and 673 mm

      Circle

      Diameter 1350 mm and 1626 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9540 mm 1. Dimensional length 9730 mm
      2. Between tyres width 2500 mm 2. Between tyres width 2800 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 3280 mm
      4. Wheelbase 7300 mm 4. Wheelbase 6681 mm
      8. Blade base 3050 mm 8. Blade base 2935 mm