- Home/
- Comparison/
- Grader/
- Fiat-Hitachi FG105 vs. Caterpillar 160H ES
Fiat-Hitachi FG105 vs. Caterpillar 160H ES
4 reasons to buy Fiat-Hitachi FG105:
Operation
Hydraulic system fluid volume | 94.6 l. and 80 l. | 15 % more or 14.6 l. |
Hydraulic system
Pump flow rate | 163 l/min and 206 l/min | 21 % less or 43 l/min |
Gear box
Maximum forward speed | 42 km/h and 40.7 km/h | 3 % more or 1.3 km/h |
Circle
Maximum lifting above ground level | 622 mm and 452 mm | 27 % more or 170 mm |
8 reasons to buy Caterpillar 160H ES:
Steerage
Turn radius | 7.4 m and 10 m | 26 % less or 2.6 m |
Operation
Fuel Capacity | 341 l. and 299 l. | 12 % more or 42 l. |
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Motor
Maximum power | 149.1 kW and 147 kW | 1 % more or 2.1 kW |
Displacement | 10.5 l. and 8.3 l. | 21 % more or 2.2 l. |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 6 and 3 | 50 % more or 3 |
Maximum reverse gear | 32.1 km/h and 27.4 km/h | 15 % more or 4.7 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 20 degrees |
Sizes
Height to cab upper part | 3340 mm and 3120 mm |
Dimensional length | 8521 mm and 8600 mm |
Between tyres width | 2540 mm and 2480 mm |
Wheelbase | 1538 mm and 6090 mm |
Blade base | 2642 mm and 2520 mm |
Operation
Tyre size | 13X24(10PR) and 14-24 12PR (G-2) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and Caterpillar |
Model | 6 CT8.3 and 3306 DITA |
Hydraulic system
Type of pump | fully oil-actuated, variable displacement piston pump and Axial-piston pump |
Overflow valve pressure | 2857 kPa and 24131.6 kPa |
Front Axle
Wheel tilt | 17.5 degrees and 18 degrees |
General fluctuations | 19 degrees and 32 degrees |
Dump
Mouldboard width | 2762 mm and 7270 mm |
Mouldboard height | 953 mm and 686 mm |
Images
Sizes
1. Dimensional length | 8521 mm | 1. Dimensional length | 8600 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2480 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3120 mm |
4. Wheelbase | 1538 mm | 4. Wheelbase | 6090 mm |
8. Blade base | 2642 mm | 8. Blade base | 2520 mm |